* [U-Boot-Users] mpc4774 @ 2005-01-15 1:57 Dave Laurin 2005-01-16 16:17 ` Kumar Gala 0 siblings, 1 reply; 2+ messages in thread From: Dave Laurin @ 2005-01-15 1:57 UTC (permalink / raw) To: u-boot I would like to use u-boot for a mpc4774 and I am looking for the gnu cross development tools to run on x86/linux. If someone has already set them up I would appreciate a link to the tools. Thank you ^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot-Users] mpc4774 2005-01-15 1:57 [U-Boot-Users] mpc4774 Dave Laurin @ 2005-01-16 16:17 ` Kumar Gala 0 siblings, 0 replies; 2+ messages in thread From: Kumar Gala @ 2005-01-16 16:17 UTC (permalink / raw) To: u-boot Dave, Do you mean the MPC7447? If so I would recommend look at http://www.kegel.com/crosstool/. Also, ELDK (http://www.denx.de/) supports the 74xx architecture. - kumar On Jan 14, 2005, at 7:57 PM, Dave Laurin wrote: > I would like to use u-boot for a mpc4774 and I am looking for the gnu > cross development tools to run on x86/linux. > If someone has already set them up I would appreciate a link to the > tools. > Thank you > > > > > ------------------------------------------------------- > The SF.Net email is sponsored by: Beat the post-holiday blues > Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. > It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-01-16 16:17 UTC | newest] Thread overview: 2+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2005-01-15 1:57 [U-Boot-Users] mpc4774 Dave Laurin 2005-01-16 16:17 ` Kumar Gala
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox