[U-Boot] [PATCH 2/4] imx: Align the imximage header and payload to multiples of 4k

["Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>]

Dear Marek Vasut,

On Monday, February 25, 2013 10:07:49 PM, Marek Vasut wrote:
> Dear Beno?t Th?baudeau,
> 
> > On Monday, February 25, 2013 7:19:55 PM, Marek Vasut wrote:
> > > The MX53 ROM loads the data from NAND in multiples of pages and
> > > supports maximum page size of 4k. Thus, align the image and header
> > > to 4k to be safe from ROM bugs.
> > > 
> > > Signed-off-by: Marek Vasut <marex@denx.de>
> > > Cc: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
> > > Cc: Fabio Estevam <fabio.estevam@freescale.com>
> > > Cc: Stefano Babic <sbabic@denx.de>
> > > ---
> > > 
> > >  tools/imximage.c |   11 +++++++----
> > >  tools/imximage.h |    3 ++-
> > >  2 files changed, 9 insertions(+), 5 deletions(-)
> > > 
> > > diff --git a/tools/imximage.c b/tools/imximage.c
> > > index fa308c9..c018562 100644
> > > --- a/tools/imximage.c
> > > +++ b/tools/imximage.c
> > > @@ -518,11 +518,14 @@ static void imximage_set_header(void *ptr, struct
> > > stat *sbuf, int ifd,
> > > 
> > >  	/*
> > >  	
> > >  	 * ROM bug alert
> > > 
> > > -	 * mx53 only loads 512 byte multiples.
> > > -	 * The remaining fraction of a block bytes would
> > > -	 * not be loaded.
> > > +	 *
> > > +	 * MX53 only loads 512 byte multiples in case of SD boot.
> > > +	 * MX53 only loads NAND page multiples in case of NAND boot and
> > > +	 * supports up to 4096 byte large pages, thus align to 4096.
> > > +	 *
> > > +	 * The remaining fraction of a block bytes would not be loaded!
> > > 
> > >  	 */
> > > 
> > > -	*header_size_ptr = ROUND(sbuf->st_size + imxhdr->flash_offset, 512);
> > > +	*header_size_ptr = ROUND(sbuf->st_size + imxhdr->flash_offset, 4096);
> > > 
> > >  }
> > >  
> > >  int imximage_check_params(struct mkimage_params *params)
> > > 
> > > diff --git a/tools/imximage.h b/tools/imximage.h
> > > index 42b6090..dfd2e9e 100644
> > > --- a/tools/imximage.h
> > > +++ b/tools/imximage.h
> > > @@ -151,13 +151,14 @@ typedef struct {
> > > 
> > >  	dcd_v2_t dcd_table;
> > >  
> > >  } imx_header_v2_t;
> > > 
> > > +/* The header must be aligned to 4k on MX53 for NAND boot */
> > > 
> > >  struct imx_header {
> > >  
> > >  	union {
> > >  	
> > >  		imx_header_v1_t hdr_v1;
> > >  		imx_header_v2_t hdr_v2;
> > >  	
> > >  	} header;
> > >  	uint32_t flash_offset;
> > > 
> > > -};
> > > +} __attribute__((aligned(4096)));
> > 
> > So what is the exact rule for the image start page in the FCB? Is it just
> > 0x400 + 4096 + start page * page size? This does not seem to match table
> > 7-12, unless 0 has a special meaning?
> 
> I believe it's '0 == offset 4096 in NAND',

You set the i.MX header to a size of 4096, then you add the 1024-byte FCB, so
we're already at 5120.

> do you happen to have board with
> 4k
> page NAND to verify this?

No. :(

> > >  typedef void (*set_dcd_val_t)(struct imx_header *imxhdr,
> > >  
> > >  					char *name, int lineno,
> > > 
> > > --
> > > 1.7.10.4

Best regards,
Beno?t