* [U-Boot-Users] USBTTY with Windows problem
@ 2006-03-15 22:43 Vovan
0 siblings, 0 replies; 2+ messages in thread
From: Vovan @ 2006-03-15 22:43 UTC (permalink / raw)
To: u-boot
Hello ,
I work with some OMAP310 based board and I need to get u-boot usbtty
console working in windows. In linux it works fine, but with windows
driver (usbser.sys) it hangs when sending from u-boot to host amount
of data greater than USBTTY_BUFFER_SIZE. When reconnecting again - the
rest of data is recieved. Do anybody know where to start ? Usbmon
shows that after USBTTY_BUFFER_SIZE data is received to host all the
rest usb packets are empty. So console hangs even when typing HELP
command in it.
--
Best regards,
Vovan
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot-Users] Usbtty with Windows problem
@ 2006-03-25 19:57 Vovan
0 siblings, 0 replies; 2+ messages in thread
From: Vovan @ 2006-03-25 19:57 UTC (permalink / raw)
To: u-boot
Hello ,
I work with OMAP310 based board and I need to get u-boot usbtty
console work with Windows. In linux it works fine, but with windows
driver (usbser.sys) it hangs when sending from u-boot to host big amount
of data, greater than USBTTY_BUFFER_SIZE. When reconnecting again - the
rest of data is recieved. Do anybody know where to start ? Usbmon
shows that after USBTTY_BUFFER_SIZE data is received to host all the
rest usb packets are empty. So console hangs even when typing HELP
command in it.
I tried to make uboot look like ACM modem, (added acm class desctiptors to
USB configuration) but it didn`t help.
--
Best regards,
Vovan mailto:vovan888 at gmail.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-03-25 19:57 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-03-25 19:57 [U-Boot-Users] Usbtty with Windows problem Vovan
-- strict thread matches above, loose matches on Subject: below --
2006-03-15 22:43 [U-Boot-Users] USBTTY " Vovan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox