From mboxrd@z Thu Jan 1 00:00:00 1970 From: feng_tian Date: Thu, 27 Dec 2007 14:31:44 +0800 (CST) Subject: [U-Boot-Users] How to support fsload in NAND Message-ID: <19981213.273291198737104702.JavaMail.coremail@bj126app68.126.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, all: I'm developing with a at91sam9260ek board, os is linux 2.6.20, boot loader is u-boot 1.1.5. We only have nand flash in the system. And I want to load kernel from nand flash with jffs2 support, then I enabled fsload by adding some configs in at91sam9260ek.h. One of those configuration commands is "CFG_CMD_JFFS2". But it seems that this configuration is for _NOR_FLASH_ not for NAND. I found another configuration is CONFIG_JFFS2_NAND, I guess this one will support jffs2 in NAND. But I still can't use _fsload_, because cmd_jffs2.c depends on CFG_CMD_JFFS2. It seems that NAND only supports nand read.jffs2 adr off size nand write.jffs2 adr off size So, my question is: Is there any way to load a file from nand(jffs2), e.g. I've one kernel image in rootfs, then I can use like this: "fsload /boot/uImage" Any comments or advices are welcome. Thanks BR feng -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20071227/7f16cd82/attachment.htm