From: Major A <andras.g.major@gmail.com>
To: u-boot@lists.denx.de
Subject: Fwd: Re: ZynqMP boot: no messages from SPL other than "Debug uart enabled"
Date: Thu, 30 Apr 2020 12:20:46 +0200 [thread overview]
Message-ID: <19e6634c-daab-bb71-74cc-2b75fa2f424e@gmail.com> (raw)
In-Reply-To: <6b4c296f-fb91-fd84-f5c8-7b4f542034e4@gmail.com>
Hi Michal,
> can you please try these files in SD boot mode?
Done, here are two logs, both in SD boot mode.
First, log.sd is with SD card inserted (with the image files that
apparently refuse to work other than the early UART message).
The other file, log.no-sd, is with no card inserted.
Cheers,
Andr?s
-------------- next part --------------
A non-text attachment was scrubbed...
Name: log.sd
Type: chemical/x-mdl-sdfile
Size: 1804 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200430/29db97cf/attachment.sd>
-------------- next part --------------
****** Xilinx System Debugger (XSDB) v2019.2
**** Build date : Nov 6 2019-22:12:26
** Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
xsdb% cd
xsdb% cd ../../home/u-boot
xsdb% pwd
C:/home/u-boot
xsdb% source script
attempting to launch hw_server
****** Xilinx hw_server v2019.2
**** Build date : Nov 6 2019 at 22:12:23
** Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
INFO: hw_server application started
INFO: Use Ctrl-C to exit hw_server application
****** Xilinx hw_server v2019.2
**** Build date : Nov 6 2019 at 22:12:23
** Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
INFO: hw_server application started
INFO: Use Ctrl-C to exit hw_server application
INFO: To connect to this hw_server instance use url: TCP:127.0.0.1:3121
Downloading Program -- C:/home/u-boot/pmufw.elf
section, .vectors.reset: 0xffdc0000 - 0xffdc0007
section, .vectors.sw_exception: 0xffdc0008 - 0xffdc000f
section, .vectors.interrupt: 0xffdc0010 - 0xffdc0017
section, .vectors.hw_exception: 0xffdc0020 - 0xffdc0027
section, .text: 0xffdc0050 - 0xffdd108b
section, .rodata: 0xffdd108c - 0xffdd31a3
section, .data: 0xffdd31a4 - 0xffdd749b
section, .sdata2: 0xffdd749c - 0xffdd749f
section, .sdata: 0xffdd74a0 - 0xffdd749f
section, .sbss: 0xffdd74a0 - 0xffdd749f
section, .bss: 0xffdd74a0 - 0xffddb4cb
section, .srdata: 0xffddb4cc - 0xffddbdef
section, .stack: 0xffddbdf0 - 0xffddcdef
section, .xpbr_serv_ext_tbl: 0xffddf6e0 - 0xffddfadf
100% 0MB 0.2MB/s 00:00
Setting PC to Program Start Address 0xffdd02a0
Successfully downloaded C:/home/u-boot/pmufw.elf
Info: MicroBlaze PMU (target 13) Running
Info: Cortex-A53 #0 (target 9) Stopped at 0xffff0000 (External Debug Request)
100% 0MB 0.2MB/s 00:00
Successfully downloaded C:/home/u-boot/spl/u-boot-spl-dtb.bin
Info: Cortex-A53 #0 (target 9) Stopped at 0xfffcc484 (Breakpoint)
udelay() at lib/time.c: 178
178: couldn't open "<u-boot build path>/lib/time.c": no such file or directory
Info: Breakpoint 0 status:
target 9: {Address: 0xfffcc484 Type: Hardware}
xsdb% Info: Cortex-A53 #0 (target 9) Stopped at 0xfffcc484 (Breakpoint)
178: couldn't open "<u-boot build path>/lib/time.c": no such file or directory
xsdb%
next prev parent reply other threads:[~2020-04-30 10:20 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-11 11:28 ZynqMP boot: no messages from SPL other than "Debug uart enabled" Major A
2020-03-12 8:15 ` Michal Simek
2020-03-12 9:12 ` Major A
2020-03-12 10:32 ` Michal Simek
2020-03-12 11:38 ` Major A
2020-03-12 11:44 ` Michal Simek
2020-03-12 12:01 ` Major A
2020-03-12 12:06 ` Michal Simek
2020-03-12 13:24 ` Major A
2020-03-12 13:31 ` Michal Simek
2020-03-12 14:19 ` Major A
2020-03-12 15:22 ` Michal Simek
2020-04-23 9:02 ` Major A
2020-04-24 12:14 ` Michal Simek
2020-04-27 22:00 ` Major A
2020-04-28 6:42 ` Michal Simek
2020-04-28 9:29 ` Major A
2020-04-28 9:33 ` Michal Simek
2020-04-28 10:53 ` Major A
2020-04-28 11:16 ` Michal Simek
2020-04-28 11:25 ` Major A
2020-04-28 11:29 ` Michal Simek
2020-04-28 13:34 ` Major A
2020-04-28 13:55 ` Michal Simek
2020-04-28 14:21 ` Major A
[not found] ` <3ab17480-431a-e0e3-c2af-e1639a2d07a6@xilinx.com>
[not found] ` <6b4c296f-fb91-fd84-f5c8-7b4f542034e4@gmail.com>
2020-04-30 10:20 ` Major A [this message]
[not found] ` <4f8b4b6a-c97d-38b8-5a74-98bbc916cb3a@xilinx.com>
2020-04-30 11:01 ` Major A
2020-04-30 11:03 ` Michal Simek
2020-04-30 11:10 ` Major A
[not found] <5be51d5e-20ee-719f-0a03-0affd83f0832@gmail.com>
2020-05-05 9:52 ` Fwd: " Major A
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=19e6634c-daab-bb71-74cc-2b75fa2f424e@gmail.com \
--to=andras.g.major@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox