From: Sean Anderson <seanga2@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v2 07/11] riscv: Add initial Sipeed Maix support
Date: Sun, 2 Feb 2020 01:06:32 -0500 [thread overview]
Message-ID: <1cf0f5e6-a8b5-85e7-9c64-e27b19c4528f@gmail.com> (raw)
In-Reply-To: <28100babec8b01176862646d9c422a65a7e89bc7.camel@auer.io>
On 1/30/20 5:21 PM, Lukas Auer wrote:
> Interesting, I thought all SD cards support SPI mode.
I think it's a different issue, but I wasn't sure.
>> The board I am using has some serial issues which makes it difficult to
>> flash any large images. I can get u-boot to flash after several
>> attempts, but something like the linux kernel is far too unreliable to
>> test regularly. I'm going to see if I can get my hands on another k210
>> board which hopefully doesn't have these issues.
>
> Ah ok, that's unfortunate. Thank you for your efforts!
I have since found a computer where the serial works fine (which implies
that the USB hardware on my current computer has some issues). I should
be able to flash larger binaries fine now, but the current issue is
getting the SPI to work. I think there may be some subtle differences
between the driver and the manufacturer's sdk.
I am also having some clock problems, despite (obstensibly) performing
the same incantations as the sdk. I guess this is what happens when they
refuse to release a technical reference...
--Sean
next prev parent reply other threads:[~2020-02-02 6:06 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-15 22:45 [PATCH v2 00/11] riscv: Add Sipeed Maix support Sean Anderson
2020-01-15 22:47 ` [PATCH v2 01/11] clk: Always use the supplied struct clk Sean Anderson
[not found] ` <752D002CFF5D0F4FA35C0100F1D73F3FA46C88BE@ATCPCS16.andestech.com>
2020-01-21 1:54 ` Rick Chen
2020-01-21 2:02 ` Sean Anderson
2020-01-21 2:23 ` Rick Chen
2020-01-21 3:18 ` Sean Anderson
2020-01-23 5:53 ` Sean Anderson
2020-01-24 14:27 ` Lukasz Majewski
2020-01-24 23:22 ` Sean Anderson
2020-01-25 20:18 ` Lukasz Majewski
2020-01-26 21:20 ` Lukasz Majewski
2020-01-26 22:07 ` Sean Anderson
2020-01-27 23:40 ` Lukasz Majewski
2020-01-28 16:11 ` Sean Anderson
2020-01-30 0:29 ` Lukasz Majewski
2020-01-30 5:47 ` Sean Anderson
2020-01-31 9:18 ` Lukasz Majewski
2020-01-15 22:49 ` [PATCH v2 02/11] clk: Check that ops of composite clock components, exist before calling Sean Anderson
2020-01-26 21:25 ` Lukasz Majewski
2020-01-15 22:50 ` [PATCH v2 03/11] riscv: Add headers for asm/global_data.h Sean Anderson
[not found] ` <752D002CFF5D0F4FA35C0100F1D73F3FA46C88DF@ATCPCS16.andestech.com>
2020-01-21 2:07 ` Rick Chen
2020-01-21 2:17 ` Sean Anderson
2020-01-26 22:04 ` Lukas Auer
2020-01-26 22:12 ` Sean Anderson
2020-01-26 22:23 ` Lukas Auer
2020-01-15 22:51 ` [PATCH v2 04/11] riscv: Add an option to default to RV64I Sean Anderson
[not found] ` <752D002CFF5D0F4FA35C0100F1D73F3FA46C88FE@ATCPCS16.andestech.com>
2020-01-21 2:16 ` Rick Chen
2020-01-15 22:53 ` [PATCH v2 05/11] riscv: Add option to disable writes to mcounteren Sean Anderson
2020-01-26 22:09 ` Lukas Auer
2020-01-26 22:24 ` Sean Anderson
2020-01-30 22:13 ` Lukas Auer
2020-01-15 22:55 ` [PATCH v2 06/11] riscv: Fix incorrect cpu frequency on RV64 Sean Anderson
2020-01-26 22:04 ` Lukas Auer
2020-01-15 23:04 ` [PATCH v2 07/11] riscv: Add initial Sipeed Maix support Sean Anderson
2020-01-26 22:17 ` Lukas Auer
2020-01-27 1:09 ` Sean Anderson
2020-01-30 22:21 ` Lukas Auer
2020-02-02 6:06 ` Sean Anderson [this message]
2020-01-15 23:16 ` [PATCH v2 00/11] riscv: Add " Sean Anderson
2020-01-15 23:18 ` [PATCH v2 08/11] riscv: Add device tree for K210 Sean Anderson
[not found] ` <752D002CFF5D0F4FA35C0100F1D73F3FA46C8947@ATCPCS16.andestech.com>
2020-01-21 2:54 ` Rick Chen
2020-01-15 23:20 ` [PATCH v2 09/11] riscv: Add K210 sysctl support Sean Anderson
2020-01-15 23:24 ` [PATCH v2 10/11] riscv: Add K210 pll support Sean Anderson
2020-01-15 23:26 ` [PATCH v2 11/11] riscv: Add K210 clock support Sean Anderson
2020-01-21 3:46 ` [PATCH v2 08/11] riscv: Add device tree for K210 Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1cf0f5e6-a8b5-85e7-9c64-e27b19c4528f@gmail.com \
--to=seanga2@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox