From: <Eugen.Hristev@microchip.com>
To: <Tudor.Ambarus@microchip.com>
Cc: <u-boot@lists.denx.de>, <Mihai.Sain@microchip.com>
Subject: Re: [PATCH] ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines
Date: Wed, 27 Apr 2022 06:08:43 +0000 [thread overview]
Message-ID: <1ea58951-7fd2-88df-e0ba-e005e6e55856@microchip.com> (raw)
In-Reply-To: <20220408091036.749648-1-tudor.ambarus@microchip.com>
On 4/8/22 12:10 PM, Tudor Ambarus wrote:
> The impedance of the QSPI PCB lines on the sama7g5ek is 50 Ohms.
> Align the output impedance of the QSPI0 HSIOs by setting a medium drive
> strength which corresponds to an impedance of 56 Ohms when VDD is in the
> 3.0V - 3.6V range. The high drive strength setting corresponds to an
> output impedance of 42 Ohms on the QSPI0 HSIOs.
> This is just a fine tunning. The memory that we have populated on sama7g5ek
> works fine even with high drive strength, but it's better to adjust it and
> use medium instead, in case some other flashes with higher frequencies are
> tested.
>
> Suggested-by: Mihai Sain <mihai.sain@microchip.com>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
Applied to u-boot-at91/master, thanks !
prev parent reply other threads:[~2022-04-27 6:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-08 9:10 [PATCH] ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines Tudor Ambarus
2022-04-27 6:08 ` Eugen.Hristev [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1ea58951-7fd2-88df-e0ba-e005e6e55856@microchip.com \
--to=eugen.hristev@microchip.com \
--cc=Mihai.Sain@microchip.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox