From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marc Leeman Date: Tue, 7 Dec 2004 08:40:40 +0100 Subject: [U-Boot-Users] Can't detect CFI flash in kernel In-Reply-To: References: Message-ID: <1f729c480412062340701b7744@mail.gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > > CFI: Found no TQM8xxL Bank 0 device at location zero CFI cannot probe your flash, maybe your mapping is not correct. > Then system hangs forever. I read the manual(13.2.6. Linux hangs after > uncompressing the kernel), and I make sure that the clocks_in_mhz and > CFG_IMMR are right defined. I doubt the reason is the flash can't be found > by kernel. euhm, what would be the error? By the time you get to this point, any responsibility of u-boot is long gone (did it's job and now it's up to the kernel). > Did I config something wrong? Yes, posting to the wrong mailinglist >:) You will need to check your kernel config and/or flash config mapping -- ash nazg durbatul?k, ash nazg gimbatul, ash nazg thrakatul?k agh burzum-ishi krimpatul