From mboxrd@z Thu Jan 1 00:00:00 1970 From: Robert Schwebel Date: Wed, 5 Mar 2003 09:12:49 +0100 Subject: [U-Boot-Users] Board init In-Reply-To: <20030305081054.A3090C6E0C@atlas.denx.de> References: <20030305081054.A3090C6E0C@atlas.denx.de> Message-ID: <20030305081249.GR3593@pengutronix.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Mar 05, 2003 at 09:10:49AM +0100, Wolfgang Denk wrote: > I don't think that this is a good solution, as it requires a > modification of the hardware and wasting a GPIO pin which should not > be necessary. I don't see another possibility - on the PXA250 you cannot use the i2c lines as generic I/O pins. Robert -- Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry Braunschweiger Str. 79, 31134 Hildesheim, Germany Handelsregister: Amtsgericht Hildesheim, HRA 2686 Phone: +49-5121-28619-0 | Fax: +49-5121-28619-4