From mboxrd@z Thu Jan  1 00:00:00 1970
From: Wolfgang Denk <wd@denx.de>
Date: Thu, 03 Apr 2003 00:32:13 +0200
Subject: [U-Boot-Users] RE: start / load addresses for initrd 
In-Reply-To: Your message of "Wed, 02 Apr 2003 16:18:51 CDT."
             <EGEGIJHKDKJGAJMGIDPNKEHBCKAA.jwalden@digitalatlantic.com> 
Message-ID: <20030402223218.8B577C587C@atlas.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

In message <EGEGIJHKDKJGAJMGIDPNKEHBCKAA.jwalden@digitalatlantic.com> you wrote:
>
> >RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> >Tracer: Initialization complete
> >RAMDISK: Compressed image found at block 0
> >RAMDISK: incomplete write (ramdisk too small?) (-28 != 32768)
> 
> So now it has found a valid ramdisk image - and it was not before,
> however I still get the other error.

You can try some of the usual  things:  load  the  images  at  higher
addresses,  for  example  the  kernel  at 0x200000 and the ramdisk at
0x600000.

> => imi 0x100000
> 
> ## Checking Image at 00100000 ...
> Image Name:   Linux-2.4.18_mvl30-walnut
> Image Type:   PowerPC Linux Kernel Image (gzip compressed)
> Data Size:    300107 Bytes = 293.1 kB
> Load Address: 00000000
>    Entry Point:  00000000
>    Verifying Checksum ... OK

The kernel size is really  small.  Please  check  again  your  kernel
configuration if it contains everything you need.


Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
A girl with a future avoids the man with a past.
                                   -- Evan Esar, "The Humor of Humor"