From mboxrd@z Thu Jan  1 00:00:00 1970
From: Robert Schwebel <robert@schwebel.de>
Date: Tue, 6 May 2003 09:26:40 +0200
Subject: [U-Boot-Users] [RFD] move memsetup.S to CPU directory
Message-ID: <20030506072640.GO2263@pengutronix.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi, 

I would like to propose that we move the memsetup.S code from the board
directories for the Innokom and CSB226 (soon also Gealog) plattform to
the cpu/xscale directory. 

- the code is absolutely generic, can be configured via CFG_ values
- it has been cleaned up
- I see no reason why it should not work on every PXA250 plattform 
- it would avoid code quadruplication ;)
- the other board maintainers probably had to test it

Comments? Shall I submit a patch? 

Robert
-- 
 Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
   Braunschweiger Str. 79,  31134 Hildesheim, Germany
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
    Phone: +49-5121-28619-0 |  Fax: +49-5121-28619-4