[U-Boot-Users] [PATCH] Calculate PLPRCR fields for MPC86x boards

[Nye Liu <nyet@mrv.com>]

As a side note, we just found out that the 859/866 family ONLY supports up to
66MHz external bus... hopefully nobody else has been bitten by this.

if your core freq is >66MHz, you MUST use the external bus x2 divisor

On Wed, Oct 08, 2003 at 11:59:47PM +0200, Wolfgang Denk wrote:
> Dear Pantelis,
> 
> in message <3F66E0F1.6000608@intracom.gr> you wrote:
> >
> > The following patch adds a program in the tools directory which
> > aids in the programming of the PLPRCR register for MPC86x based boards.
> > 
> > That is given an input clock xin and a target clock gclk2 it
> > will output (if possible) the values of the PCPRCR fields required.
> 
> Thanks, added. (But target disabled by default in the tools/Makefile).
> 
> Will show up  on CVS soon.
> 
> Best regards,
> 
> Wolfgang Denk
> 
> -- 
> Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
> Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
> The use of COBOL cripples the mind; its teaching  should,  therefore,
> be regarded as a criminal offense.                   - E. W. Dijkstra
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: SF.net Giveback Program.
> SourceForge.net hosts over 70,000 Open Source Projects.
> See the people who have HELPED US provide better services:
> Click here: http://sourceforge.net/supporters.php
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users

-- 
Nye Liu
nliu at mrv.com
(818) 772-6235x248

"Who would be stupid enough to quote a fictitious character?"
	-- Don Quixote