[U-Boot-Users] Accessing PRAM on SCC ( MPC852T )

[Raghu <raghu_dk@yahoo.com>]

Hi, 

I need some insight into the u-boot cpu/mpc8xx/scc.c
driver. I am able to use the SCC4 with these settings
but to use the SCC3 I have got to comment these line. 
Any leading as to where I can look for an explanation
most welcome. 

Thanks in advance. 

Warm Regards,
Raghu

   pram_ptr->sen_pper   = 0x0;         /* Persistence
(unused) */
    pram_ptr->sen_iaddr1 = 0x0;         /* Individual
Address Filter 1 (unused) */
    pram_ptr->sen_iaddr2 = 0x0;         /* Individual
Address Filter 2 (unused) */
    pram_ptr->sen_iaddr3 = 0x0;         /* Individual
Address Filter 3 (unused) */
    pram_ptr->sen_iaddr4 = 0x0;         /* Individual
Address Filter 4 (unused) */
    pram_ptr->sen_taddrh = 0x0;         /* Tmp Address
(MSB) (unused) */
    pram_ptr->sen_taddrm = 0x0;         /* Tmp Address
(unused) */
    pram_ptr->sen_taddrl = 0x0;         /* Tmp Address
(LSB) (unused) */

__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/