From mboxrd@z Thu Jan 1 00:00:00 1970 From: Markus Pietrek Date: Thu, 15 Jan 2004 09:48:59 +0100 Subject: [U-Boot-Users] Patch for NAND Booting on SMDK2410 In-Reply-To: <005c01c3daa8$0ed09f20$c922a8c0@Invocon.com> References: <005c01c3daa8$0ed09f20$c922a8c0@Invocon.com> Message-ID: <200401150948.59962.mpietrek@fsforth.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Matt, > Thanks. That helps. Now I'm curious as to how you are using this new > functionality. I am developing a platform based on the s3c2410 and have > been using U-boot (booting from NOR) as a development boot-loader since > I can easily tftp new code, file systems, etc. We are also developing a board based on the s3c2410 but intended to use only NAND flash. With this patch I demonstrated that we are able to boot from it. But I haven't started yet to port cmd_nand.c to the s3c2410 hardware nand support feature. This will come up in about two months again. cmd_nand.c though needs to be rewritten, mainly the commands NanD_Command, NaND_Address, nand_write_ecc, nand_read_oob etc. Bye, -- Markus Pietrek FS Forth-Systeme GmbH Phone: +49 (7667) 908 145, FAX +49 (7667) 908 221