From mboxrd@z Thu Jan  1 00:00:00 1970
From: Wolfgang Denk <wd@denx.de>
Date: Wed, 28 Jan 2004 23:48:00 +0100
Subject: [U-Boot-Users] U-boot for MIPS - problem using latest gcc 
In-Reply-To: Your message of "Wed, 28 Jan 2004 14:04:18 PST."
             <603BA0CFF3788E46A0DB0918D9AA95100A0E2F3D@sj580004wcom.int.lantronix.com> 
Message-ID: <20040128224805.6EBCDC115D@atlas.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

In message <603BA0CFF3788E46A0DB0918D9AA95100A0E2F3D@sj580004wcom.int.lantronix.com> you wrote:
> First - I downloaded u-boot v1.0

I could ask wy you use an old version, but it does not matter here.

> Then - I changed CROSS_COMPILE to be the latest MIPS compiler

See below.

> Then - I did a make dbau1x00_config
> Then - I did a make all.
> Memsetup.S is definitely in board/dbau1x00/
> So - the file is not missing.

Indeed. And actually this is building fine:

	-> tar jxf /opt/tarballs/u-boot-1.0.0.tar.bz2 
	-> cd u-boot-1.0.0
	-> MAKEALL dbau1x00
	rm -f include/config.h include/config.mk
	Configuring for dbau1x00 board...
	net.c: In function `NetStartAgain':
	net.c:492: warning: integer overflow in expression
	   text    data     bss     dec     hex filename
	 112120    4760   17252  134132   20bf4 u-boot

> Since it is not missing - it must be "incorrect".  What would "incorrect
> be"?

Since all of your  steps  except  one  work  fine  here  I  can  only
speculate  that  the  problem  must be in the step where we do things
differently: I use a working compiler.

Seems your toolchain has some problems?


Best regards,

Wolfgang Denk

-- 
See us @ Embedded World, Nuremberg, Feb 17 - 19,  Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
"I haven't lost my mind - it's backed up on tape somewhere."