[U-Boot-Users] IMMAP M5282 correct?

[Josef Baumgartner <josef.baumgartner@telex.de>]

Hi,

I created the mcf52x2 port using the older patches for u-boot 0.4.0.
I'm working with the Motorola MCF5272C3 evaluation board. The parts
for the 5272 are working very well!

For the mcf5282 I only integrated the old code to be able to compile it with 
the new u-boot version. The code was not tested and still needs some work for 
a stable release. I don't have any 5282 hardware so I couldn't do the work.

I know there are a few people around working at the 5282 port but  I don't
know the status of their work.

Regards,

Josef Baumgartner



On Wednesday 07 April 2004 16:26, nafiton smith wrote:
> Hello
>
> I am having problems trying to use the net features on a new board
> configuration.
> Is it possible that the include/asm-m68k/immap_5282.h file is wrong? It
> seems to not coincide with Motorola documentation about its FEC registers.
>
> Thanks
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users

-- 
-------------------------------------------------------------------------------
Josef Baumgartner
Entwicklung

EVI Audio GmbH
Hirschberger Ring 45
94315 Straubing
Tel.: +49 (9421) 706 -289
eMail: josef.baumgartner at telex.de
-------------------------------------------------------------------------------
????????