[U-Boot-Users] srec download fail

[Wolfgang Denk <wd@denx.de>]

In message <04060417362608.02269@pcj86> you wrote:
> 
> this is the second error report related to download problems by using the 
> serial line. AFAICR I had have trouble too some times ago; just I expact any 
> serious error in the Nios port. Sadly, I'm really busy with other projects so 
> I can't explore the reason for this problem in the next time. Is there 
> anybody who can do this job?

I don;t think there is anything wrong with the NIOS port, as the O.P.
reports that "loadb" with Kermit  is  working  fine,  which  is  more
stressing on the serial port than "loads".

I think it's a misconfiguration.

Most probably it's just that you missed to set  CONFIG_LOADS_ECHO  in
the board configuration file and/or loads_echo in the environment.


The "timed out looking for echo" message is pretty clear to me  -  if
no  echo  is found, then there probably is no echo because it was not
turned on.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Randal said it would be tough to do in sed. He didn't say  he  didn't
understand  sed.  Randal  understands sed quite well. Which is why he
uses Perl. :-)         - Larry Wall in <7874@jpl-devvax.JPL.NASA.GOV>