[U-Boot-Users] [PATCH] Motorola i.MX support (1/2)

[Robert Schwebel <robert@schwebel.de>]

Hi, 

On Fri, Jun 18, 2004 at 09:30:20PM +0200, Sascha Hauer wrote:
> I've just had a look at the i.MX (MC9328 MX1, or however this thing is
> called) Port in current CVS. The main differences are:

I would prefer imx for the architecture - it's i.MX, not only MC9328 or
even MX1. 

> - different boards supported. Two custom boards <-> MX1ADS. Adding
>   support for MX1ADS should be no problem, though, since we only have 
>   to rewrite some register definitions. Unfortunately I don't
>   have the hardware.

Having support for the ADS would definitely a Good Thing (TM). 

> > (1) add your patch
> > (2) add your patch and revert Ming-Len Wu's patch
> > (3) use Ming-Len Wu's code as base for which you submit fixes/improvements
> > 
> > (1) means that we have the same architecture / board supported  twice
> >     differently. Not good. rejected.
> > 
> > >From your posting it seems clear that your position is (2) [is  it?];
> 
> So I would prefer position (2), too.

I would prefer to do (2) with a little bit of (3) ;) It shouldn't be too
much work to port Mng-Len Wu's port to the more generic variant. 

Robert
-- 
 Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
     Hornemannstra?e 12,  31137 Hildesheim, Germany
    Phone: +49-5121-28619-0 |  Fax: +49-5121-28619-4