From mboxrd@z Thu Jan  1 00:00:00 1970
From: George G. Davis <gdavis@mvista.com>
Date: Tue, 24 Aug 2004 21:50:44 -0400
Subject: [U-Boot-Users] Anyone has  success with MX1ADS?
In-Reply-To: <20040824234714.91139.qmail@web12505.mail.yahoo.com>
References: <20040824161000.GL5222@mvista.com> <20040824234714.91139.qmail@web12505.mail.yahoo.com>
Message-ID: <20040825015044.GA27443@mvista.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Wed, Aug 25, 2004 at 07:47:14AM +0800, W Sung wrote:
> Hi George,
> 
> I converted the SREC to boostrap mode format and
> download U-boot to RAM. Can it I do that? or I must
> burn it to flash first?

I grabbed and extracted REDBOOT.zip here:

http://search.freescale.com/cs.html?url=http%3A//www.freescale.com/files/soft_dev_tools/software_tools/initialization/boot_code_generation/REDBOOT.zip&qt=redboot&col=product&n=1

Refer to redboot_200405/doc/redboot_mx1.pdf in the above for help installing
RedBoot into flash on the MX1 ADS. Then note that you can s/RedBoot/U-Boot/g
in those instructions to install u-boot, more or less.

Using redboot_200405/tools/mx1flash-v2.0.1/mx1flash included in REDBOOT.zip,
I did the following on an MS Windows host:

mx1flash 1 8800000 C000000 u-boot.bin

Works like a charm for me.

Oh, have a look at redboot_200405/tools/mx1flash-v2.0.1/ReadMe.txt for other
tips too.

--
Regards,
George

> 
> Anyway, I will checkout the latest u-boot from CVS and
> try your approach again.
> 
> waikong
> 
>  --- "George G. Davis" <gdavis@mvista.com> ???
> > On Mon, Aug 23, 2004 at 07:35:00PM +0800, Wai-Kong
> > Sung wrote:
> > > Hi,
> > > 
> > > I am new with U-Boot and I am trying to use it
> > with Moto's MX1ADS. I 
> > > downloaded the u-boot-2004-08-18-2000.tar.bz2 from
> > the DEX ftp site. I 
> > > It compiled( mx1ads_config and
> > CROSS_COMPILE=arm-linux-) without problem 
> > > but didn't run when I downloaded to the board. I
> > am using the MX1 
> > > bootstrap mode to download U-Boot.
> > 
> > Did you use bootstrap mode to merely download it or
> > install it into flash?
> > 
> > > 
> > > The board is functioning since I can download and
> > run other applications.
> > > 
> > > Any pointer would be greatly appreciate!
> > 
> > FWIW, I just confirmed that latest u-boot CVS +/- a
> > few hours works on my
> > MX1ADS board:
> > 
> > 
> > U-Boot 1.1.2 (Aug 24 2004 - 11:49:40)
> > 
> > U-Boot code: 08400000 -> 08418414  BSS: -> 0841C868
> > RAM Configuration:
> > Bank #0: 08000000 64 MB
> > Flash: 16 MB
> > *** Warning - bad CRC, using default environment
> > 
> > In:    serial
> > Out:   serial
> > Err:   serial
> > MX1ADS board with MC9328 MX1 (0L44N), Silicon ID
> > 0x0005901d
> > 
> > Hit any key to stop autoboot:  0
> > MX1ADS$
> > 
> > 
> > I used the mx1flash install utility included in the
> > MX1 RedBoot package
> > available from Freescale to install u-boot into
> > SyncFlash on my board.
> > After installing u-boot into flash via mx1flash
> > (using bootstrap mode),
> > I set S22-2 (BOOT1) OFF and u-boot works ok for me.
> > Default console is on
> > UART1 at 115200n8.
> > 
> > --
> > Regards,
> > George
> >  
> 
> __________________________________
> ???????????????Webcam?????
> ?? Yahoo! Messenger
> http://messenger.yahoo.com.hk/
> 
> 
> -------------------------------------------------------
> SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
> 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
> Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
> http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users