public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: George G. Davis <gdavis@mvista.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Initialize MAC Address w/out running dhcp
Date: Fri, 27 Aug 2004 13:05:48 -0400	[thread overview]
Message-ID: <20040827170548.GC9450@mvista.com> (raw)
In-Reply-To: <20040826231442.EA50CC109F@atlas.denx.de>

On Fri, Aug 27, 2004 at 01:14:37AM +0200, Wolfgang Denk wrote:
> In message <31ADFA827355984B9E2A161514595B561C3395@lpdsrv04.logicpd.com> you wrote:
> > 
> > I have observed on my omap1510inn based board that Linux does not correctly
> > receive the MAC address unless I make use of networking in U-Boot prior to
> > bootm.
> 
> This is a FAQ. Please see
> http://www.denx.de/twiki/bin/view/DULG/EthernetDoesNotWorkInLinux

Actually, in the case of the Innovator OMAP1510, the Linux smc919x or smc9194
driver (depending on which you're using) should do the right thing independent
of u-boot. Perhaps you don't have the SMC91C96 DIP switches set correctly
on the Innovator break-out-board. Mine are SW1 1,2,3 OFF, 4 ON. If those DIP
switch settings are wrong, then the SMC91C96 serial EEPROM may be disabled
and this u-boot dependency may be a side effect since u-boot doesn't use
the serial EEPROM MAC address. Then again, I haven't tested booting Linux
w/o first doing u-boot bootp/tftp lately. So maybe there is a regression
in the Linux network driver(s). : P Also, some early Innovator BOB's didn't
have serial EEPROM MAC address programmed which may also cause this
problem. If the Innovator BOB has MAC address label attached to it (mine
is lower right corner below the power supply binding posts) then the
serial EEPROM MAC has most likely been programmed at the factory. Else,
you'll need to program the serial EEPROM yourself. IIRC, others have posted
tools to set the serial EEPROM MAC address.

HTH!

--
Regards,
George
> 
> Best regards,
> 
> Wolfgang Denk
> 
> -- 
> Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
> Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
> egrep patterns are full regular expressions; it uses a fast  determi-
> nistic algorithm that sometimes needs exponential space.
> - unix manuals
> 
> 
> -------------------------------------------------------
> SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
> 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
> Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
> http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users

      reply	other threads:[~2004-08-27 17:05 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-08-26 22:37 [U-Boot-Users] Initialize MAC Address w/out running dhcp Michael Bendzick
2004-08-26 23:14 ` Wolfgang Denk
2004-08-27 17:05   ` George G. Davis [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040827170548.GC9450@mvista.com \
    --to=gdavis@mvista.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox