From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chris Jones Date: Mon, 20 Sep 2004 18:34:31 -0700 Subject: [U-Boot-Users] U-boot for MIPS problems compiling... In-Reply-To: <20040916232900.96AE9C1430@atlas.denx.de> References: <20040916180715.GW32080@qworks.ca> <20040916232900.96AE9C1430@atlas.denx.de> Message-ID: <20040921013431.GE32080@qworks.ca> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Wolfgang; On Fri, Sep 17, 2004 at 01:28:55AM +0200, Wolfgang Denk wrote: > The current version (3.0) of the ELDK does not support little-endian > MIPS systems; the next version (3.1, to be released soon) will > support it. It's based on GCC-3.3.3, glibc 2.3.1-51a and binutils > 2.14. I have no problems compiling MIPS code with it (compile-clean > for all U-Boot boards, actyually tested for MIPS on INCA-IP and > XXS1500). That's great. Hoping I'll be able to use your patches against what I have so I can keep just one cross-compiler for kernel/u-boot building. Leif: I've had some much better success switching to this toolchain: gcc-3.2.3-glibc-2.2.3-binutils-2.13 However, now I'm getting the following error when building. I know it looks long and NASTY, but it basically amounts to an undefined reference. I was hoping you might know the solution. Also, Yes, I know ld segfaults which is very bad and probably indicates a broken toolchain...sigh...I hope I don't get spanked for that! The undefined reference does come before the segfault though. make[1]: Leaving directory `/home/cjones/dev/boot/u-boot-1.1.1/common' UNDEF_SYM=`mipsel-unknown-linux-gnu-objdump -x lib_generic/libgeneric.a board/dbau1x00/libdbau1x00.a cpu/mips/libmips.a lib_mips/libmips.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a drivers/sk98lin/libsk98lin.a post/libpost.a post/cpu/libcpu.a common/libcommon.a |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ mipsel-unknown-linux-gnu-ld -Bstatic -T /home/cjones/dev/boot/u-boot-1.1.1/board/dbau1x00/u-boot.lds -Ttext 0xbfc00000 $UNDEF_SYM cpu/mips/start.o \ --start-group lib_generic/libgeneric.a board/dbau1x00/libdbau1x00.a cpu/mips/libmips.a lib_mips/libmips.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a drivers/sk98lin/libsk98lin.a post/libpost.a post/cpu/libcpu.a common/libcommon.a --no-warn-mismatch -L /opt/crosstool/mipsel-unknown-linux-gnu/gcc-3.2.3-glibc-2.2.3/lib/gcc-lib/mipsel-unknown-linux-gnu/3.2.3 -lgcc --end-group \ -Map u-boot.map -o u-boot cpu/mips/start.o: In function `reset': cpu/mips/start.o(.text+0x460): undefined reference to `_GLOBAL_OFFSET_TABLE_' /bin/sh: line 1: 4411 Segmentation fault mipsel-unknown-linux-gnu-ld -Bstatic -T /home/cjones/dev/boot/u-boot-1.1.1/board/dbau1x00/u-boot.lds -Ttext 0xbfc00000 $UNDEF_SYM cpu/mips/start.o --start-group lib_generic/libgeneric.a board/dbau1x00/libdbau1x00.a cpu/mips/libmips.a lib_mips/libmips.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a drivers/sk98lin/libsk98lin.a post/libpost.a post/cpu/libcpu.a common/libcommon.a --no-warn-mismatch -L /opt/crosstool/mipsel-unknown-linux-gnu/gcc-3.2.3-glibc-2.2.3/lib/gcc-lib/mipsel-unknown-linux-gnu/3.2.3 -lgcc --end-group -Map u-boot.map -o u-boot make: *** [u-boot] Error 139 Cheers, -=cj -- Chris Jones | Software Developer | Sutus, Inc. t: +1.604.987.8866 x 2204 | e: cjones at sutus.com