* [U-Boot-Users] complile problem
@ 2004-10-07 7:15 吴兵
2004-10-07 18:15 ` Wolfgang Denk
0 siblings, 1 reply; 2+ messages in thread
From: 吴兵 @ 2004-10-07 7:15 UTC (permalink / raw)
To: u-boot
hi everyone
i have a problem about compliling u-boot
my board had not give the tools that can debug by jtag under linux, so i want to compile the u-boot in the ads, i don't know these two compliling tools are compatible .
i have no good idea to solve the problem
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot-Users] complile problem
2004-10-07 7:15 [U-Boot-Users] complile problem 吴兵
@ 2004-10-07 18:15 ` Wolfgang Denk
0 siblings, 0 replies; 2+ messages in thread
From: Wolfgang Denk @ 2004-10-07 18:15 UTC (permalink / raw)
To: u-boot
In message <E1CFSVG-0008Ny-OK@sc8-sf-mx1.sourceforge.net> you wrote:
>
> i have a problem about compliling u-boot
> my board had not give the tools that can debug by jtag under linux, so i want to compile the u-boot in the ads, i don't know these two compliling tools are compatible .
> i have no good idea to solve the problem
I don't have an idea either as you don't bother to explain what "in
the ads" is. A more descriptive question would certainly give better
results.
As for compilation of U-Boot: if you need tools just use the ELDK.
It's available for free.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
All easy problems have already been solved.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-10-07 18:15 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-10-07 7:15 [U-Boot-Users] complile problem 吴兵
2004-10-07 18:15 ` Wolfgang Denk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox