[U-Boot-Users] u-boot for pxa255

[Wolfgang Denk <wd@denx.de>]

In message <eae046ff04120604512f2fc069@mail.gmail.com> you wrote:
> 
> Since I dont have the BDI connection interface,

Then your next step should be to get access to a BDI2000.

> I cannot debug the kernel, the board is of XSCALE arch,
> and has 32MB RAM, and i've given TEXT_BASE as 0xA07E0000,
> which is inside the 32MB, and I have put the kernel as uncompressed,
> and the XIP patch is already applied for that.(I'm using MVLinux 2.4.20)

Are you sure you really understand what you are doing? You  say  that
the  kernel is linked for a RAM address and then say that you want to
use XIP - which is a completely different thing. Why don;t you try to
get a plain kernel running first, before adding more complexity  like
XIP?


Can you please continue this discussion on  the  ARM  kernel  mailing
list? IMHO it is actually off topic here.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Either one of us, by himself, is expendable.  Both of us are not.
	-- Kirk, "The Devil in the Dark", stardate 3196.1