From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marco Schramel Date: Wed, 19 Jan 2005 07:12:49 +0100 Subject: [U-Boot-Users] PCI Interrupt Message-ID: <200501190712.49778.Schramel.Linux@go.bartec.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, Our custom board is designed with a mpc8270. U-Boot is running on it. The pci-bridge on the 8270 seems to be initialized. The pci command works and shows me the bridge. On the pci-bus is a pci target connect. Its interrupt is routed to IRQ2. How i can tell U-Boot that my pci interrupt is IRQ2 ?? Thanks in advance Marco Schramel -- --------- Marco Schramel R&D Bartec GmbH Schulstr. 30 94239 Gotteszell, Germany www.bartec.de Marco.Schramel at go.bartec.de Phone: +49 (0)9929/301332 Fax: +49 (0)9929/301112