* [U-Boot-Users] Flash Burst Mode
@ 2005-01-24 14:03 Konstantin Kletschke
0 siblings, 0 replies; only message in thread
From: Konstantin Kletschke @ 2005-01-24 14:03 UTC (permalink / raw)
To: u-boot
Hi People :)
At the moment I am trying to get the burst read mode of my flash chips
running. I have a Motorola i-MX CPU with ARM9 core. The Flash device is
a 28F128K18: "Intel StrataFlash(R) Synchronous Memory".
If I understood right I tell the flash device with some commands and
data register words delivered by address bus to work in sync mode. After
that I program the chip select control signal of the microcontroller to
enable burst modus.
I am doing that by hand with the u-boot CLI but I manage to read garbage
after enabling the burst mode only.
Does anybody have made such a setup working? Or is there one board in
the u-boot source tree make use of flash burst mode so I can put this
into i.MX arch also?
Kind Regards, Konsti
--
GPG KeyID EF62FCEF
Fingerprint: 13C9 B16B 9844 EC15 CC2E A080 1E69 3FDA EF62 FCEF
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-01-24 14:03 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-01-24 14:03 [U-Boot-Users] Flash Burst Mode Konstantin Kletschke
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox