From: Ladislav Michl <ladis@linux-mips.org>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] cfi_flash support for 8 bit port width S29GL032M
Date: Mon, 18 Apr 2005 14:25:20 +0200 [thread overview]
Message-ID: <20050418122520.GA13690@orphique> (raw)
In-Reply-To: <20050418120045.37157.qmail@web15908.mail.cnb.yahoo.com>
On Mon, Apr 18, 2005 at 08:00:45PM +0800, Sam Song wrote:
> --- Alexandre BASTOS <alebas@televes.com> wrote:
> [snip]
> > So, my question is ... Is the S29GL032M (or AMD
> > equivalent AM29LV320M) already supported in byte
> > mode for any board in u-boot?.
> > I have been testing some of the drivers, but I still
> > couldn't find a working solution for my board.
>
> U could try the flash driver of RPXlite DW. If I
> remember right, this one could work well for 4*8bit
> of AM29LV320M. As for cfi driver, I haven't heard
> about it can work for any AMD FLASH chip:-( Maybe I
> exaggerate the case? Hope I am wrong:-)
Perhaps because some AMD chips are JEDEC compatible?
Quick look to datasheet shows that AM29LV320M is JEDEC
compatible and therefore cfi_flash driver will not work
for it (it works nicely for CFI compatible AMD chips such
as AM29DL323).
There is no generic driver for JEDEC flashes in U-Boot, so
you'll have to provide your own flash driver in board's
directory.
Best regards,
ladis
next prev parent reply other threads:[~2005-04-18 12:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-18 12:00 [U-Boot-Users] cfi_flash support for 8 bit port width S29GL032M Sam Song
2005-04-18 12:25 ` Ladislav Michl [this message]
2005-04-18 13:36 ` Alexandre BASTOS
2005-04-18 13:40 ` Alexandre BASTOS
-- strict thread matches above, loose matches on Subject: below --
2005-04-21 9:50 Sam Song
2005-04-21 11:03 ` Alex BASTOS
2005-04-18 11:38 Alexandre BASTOS
2005-04-18 12:46 ` Sebastian Schau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050418122520.GA13690@orphique \
--to=ladis@linux-mips.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox