From: Gerhard Jaeger <g.jaeger@sysgo.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Marvell 88E1111 PHY
Date: Wed, 15 Jun 2005 12:10:46 +0200 [thread overview]
Message-ID: <200506151210.46133.g.jaeger@sysgo.com> (raw)
In-Reply-To: <000801c57190$e899f3c0$f201a8c0@SN7606>
On Wednesday 15 June 2005 11:59, David Grab wrote:
> Hello,
>
> my u-boot is now booting from flash. Big thanks to everyone helped me. ;-)
>
> But now i am configuring ethernet in u-boot for my 440GX Board. It uses
> Marvel 88E1111 PHY?s. Did someone worked with this PHY and u-boot or knows
> if it is supported?
>
> config file definitions:
>
> #define CONFIG_MII 1 /* MII PHY management */
> #define CONFIG_PHY_ADDR 0x5 /* PHY address, See schematics */
> #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
> #define CONFIG_NETMASK 255.255.252.0
> #define CONFIG_IPADDR 192.168.0.116
> #define CONFIG_ETHADDR 00:04:AC:E3:28:8A
>
> #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
> CFG_CMD_IRQ | \
> CFG_CMD_I2C | \
> CFG_CMD_BEDBUG | \
> CFG_CMD_ENV | \
> CFG_CMD_MII | \
> CFG_CMD_DIAG | \
> CFG_CMD_PING | \
> CFG_CMD_NET | \
> CFG_CMD_ELF )
>
> Thanks for any help,
>
Hi,
I know, that the MPC85xx CPU specific part contains support for the Marvel 88E1111,
check the file tsec.c in u-boot/cpu/mpc85xx
Hope this help
Gerhard
--
Gerhard Jaeger <gjaeger@sysgo.com>
SYSGO AG Embedded and Real-Time Software
www.sysgo.com | www.elinos.com | www.pikeos.com | www.osek.de
next prev parent reply other threads:[~2005-06-15 10:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-15 9:59 [U-Boot-Users] Marvell 88E1111 PHY David Grab
2005-06-15 10:10 ` Gerhard Jaeger [this message]
2005-06-15 19:14 ` Kylo Ginsberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200506151210.46133.g.jaeger@sysgo.com \
--to=g.jaeger@sysgo.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox