From mboxrd@z Thu Jan 1 00:00:00 1970 From: Scott Harper Date: Wed, 3 Aug 2005 10:23:15 -0700 Subject: [U-Boot-Users] Problem while Enabling Data Cache for MPC8260 based custom board In-Reply-To: <20050803163613.704CF353BF9@atlas.denx.de> References: <20050803163613.704CF353BF9@atlas.denx.de> Message-ID: <200508031023.15992.scott@lassen.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de I see this problem here also. If it is the same problem I noted this when looking at triggers off of the backplane but did not see this with the REV 1 transition module. I will see if this is the same problem or maybe something new. In either case expect an answer tomorrow about this. Scott On Wednesday 03 August 2005 09:36, Wolfgang Denk wrote: > In message you wrote: > > We have designed MPC8260 based custom board. I enabled I-Cache and > > u-boot still works. But as soon as I enabled D-Cache nothing comes up on > > Hyper Terminal. > > It is always a good idea to read the documentation *before* posting, > especially the README. It has a special "Note" section about this. If > you ignore it you get what you ask for - trouble. > > Best regards, > > Wolfgang Denk -- Scott Harper Senior Software Engineer ELI scott at lassen.com fax: 360 697 3746 Phone: 360 697 3746