[U-Boot-Users] Problem while Enabling Data Cache for MPC8260 based custom board

[U-Boot-Users] Problem while Enabling Data Cache for MPC8260 based custom board

[Dipen_Patel]

Dear Mailing List,

 

We have designed MPC8260 based custom board. I enabled I-Cache and
u-boot still works. But as soon as I enabled D-Cache nothing comes up on
Hyper Terminal.

 

Can anyone suggest regarding this problem? 

 

Regards,

Dipen Patel

 



DISCLAIMER:
This email (including any attachments) is intended for the sole use of the intended recipient/s and may contain material that is CONFIDENTIAL AND PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or distribution or forwarding of any or all of the contents in this message is STRICTLY PROHIBITED. If you are not the intended recipient, please contact the sender by email and delete all copies; your cooperation in this regard is appreciated.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20050803/c0ba0e65/attachment.htm 

[U-Boot-Users] Problem while Enabling Data Cache for MPC8260 based custom board

[Wolfgang Denk]

In message <D8595042F3765A4285B848A78A2C2ED18A6717@bsdmsg002.corp.satyam.ad> you wrote:
> 
> We have designed MPC8260 based custom board. I enabled I-Cache and
> u-boot still works. But as soon as I enabled D-Cache nothing comes up on
> Hyper Terminal.

It is always a good idea to read the documentation *before*  posting,
especially the README. It has a special "Note" section about this. If
you ignore it you get what you ask for - trouble.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Don't have a battle of wits with an unarmed opponent.

[U-Boot-Users] Problem while Enabling Data Cache for MPC8260 based custom board

[Scott Harper]

I see this problem here also.

If it is the same problem I noted this when looking at triggers off of the 
backplane but did not see this with the REV 1 transition module.  I will see 
if this is the same problem or maybe something new.  In either case expect an 
answer tomorrow about this.

Scott

On Wednesday 03 August 2005 09:36, Wolfgang Denk wrote:
> In message <D8595042F3765A4285B848A78A2C2ED18A6717@bsdmsg002.corp.satyam.ad> 
you wrote:
> > We have designed MPC8260 based custom board. I enabled I-Cache and
> > u-boot still works. But as soon as I enabled D-Cache nothing comes up on
> > Hyper Terminal.
>
> It is always a good idea to read the documentation *before*  posting,
> especially the README. It has a special "Note" section about this. If
> you ignore it you get what you ask for - trouble.
>
> Best regards,
>
> Wolfgang Denk

-- 
Scott Harper
Senior Software Engineer
ELI
scott at lassen.com
fax: 360 697 3746
Phone: 360 697 3746

[U-Boot-Users] Problem while Enabling Data Cache for MPC8260 based custom board

[Scott Harper]

Wrong list different problem.  Not related at all. 

My apologies.

Scott

On Wednesday 03 August 2005 10:23, Scott Harper wrote:
> I see this problem here also.
>
> If it is the same problem I noted this when looking at triggers off of the
> backplane but did not see this with the REV 1 transition module.  I will
> see if this is the same problem or maybe something new.  In either case
> expect an answer tomorrow about this.
>
> Scott
>
> On Wednesday 03 August 2005 09:36, Wolfgang Denk wrote:
> > In message
> > <D8595042F3765A4285B848A78A2C2ED18A6717@bsdmsg002.corp.satyam.ad>
>
> you wrote:
> > > We have designed MPC8260 based custom board. I enabled I-Cache and
> > > u-boot still works. But as soon as I enabled D-Cache nothing comes up
> > > on Hyper Terminal.
> >
> > It is always a good idea to read the documentation *before*  posting,
> > especially the README. It has a special "Note" section about this. If
> > you ignore it you get what you ask for - trouble.
> >
> > Best regards,
> >
> > Wolfgang Denk

-- 
Scott Harper
Senior Software Engineer
ELI
scott at lassen.com
fax: 360 697 3746
Phone: 360 697 3746

[U-Boot-Users] Problem while Enabling Data Cache for MPC8260 based custom board

[Randy Noah]