[U-Boot-Users] Ati M6 initialization in u-boot

[U-Boot-Users] Ati M6 initialization in u-boot

[Roberto Pavon Sierra]

Hi,

How can i initialize an ATI M6 video card with u-boot for a ppc 440?

Regards,

Roberto

[U-Boot-Users] Ati M6 initialization in u-boot

[Wolfgang Denk]

In message <000d01c5c410$7cb402e0$8700a8c0@SN7855> you wrote:
> 
> How can i initialize an ATI M6 video card with u-boot for a ppc 440?

You asked the same question before on the  linuxppc-embedded  mailing
list, and received several replies already.

In U-Boot, you can find an x86 emulator in the board/MAI/bios_emulator/
directory; so far this has only been used by the AmigaOneG3SE board.

You will probably have to spend some effort to  get  it  working  for
your configuration.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Build a system that even a fool can use and only a fool will want  to
use it.

[U-Boot-Users] Ati M6 initialization in u-boot

[Gerhard Jaeger]

On Wednesday 28 September 2005 11:39, Roberto Pavon Sierra wrote:
> Hi,
> 
> How can i initialize an ATI M6 video card with u-boot for a ppc 440?
> 
Hi Roberto,

I'm not sure if you're reading answers (you got one on the ppc-embedded
list), but you're bothering now at least three lists with the same 
question over and over again and I think it's now time to accept that 
there is no painless way to get a solution for your problem.

One thing: if you don't get any answer to your request(s), then it's
because nobody has a solution. AND, this circumstance won't change
if you ask a hundred times.

Ciao,
Gerhard