From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Network problem in u-boot.
Date: Mon, 14 Nov 2005 16:19:31 +0100 [thread overview]
Message-ID: <200511141619.31441.sr@denx.de> (raw)
In-Reply-To: <20051114151228.76A1F352B1F@atlas.denx.de>
On Monday 14 November 2005 16:12, Wolfgang Denk wrote:
> > The problem is that sometimes the network in u-boot stops, e.g. just
> > getting TTT in a tftp transfer. I foud out that this occurs when another
> > packet not involed in the tftp fransfer arrives. It could be a
> > TCP-connect attempt from another host to u-boot or a ARP request. With a
> > network sniffer I can se that u-boot still send data, but all data
> > ariving is never processed. A reset of the board is needed to get it up
> > and running again.
> >
> > The board is a custom bord whith AMCC440ep based on bamboo.
>
> I cannot confirm this. I just tested approx. 20 downloads on a bamboo
> board without any such problems.
>
> What exactly is your network configuration? 10 / 100 Mbps? FD / HD?
> IP addresses? Netmask?
And do you use a valid MAC address? Did you try to enable debugging in the 4xx
ethernet driver? If not, please do this and post some results here.
Viele Gr??e,
Stefan
next prev parent reply other threads:[~2005-11-14 15:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-14 13:52 [U-Boot-Users] Network problem in u-boot André Berggren
2005-11-14 15:12 ` Wolfgang Denk
2005-11-14 15:19 ` Stefan Roese [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-11-14 15:34 André Berggren
2005-11-16 13:09 André Berggren
2005-11-16 17:53 ` Stefan Roese
2005-11-17 8:55 André Berggren
2005-11-17 9:58 ` Stefan Roese
2005-11-17 10:13 André Berggren
2005-11-17 10:34 ` Stefan Roese
2005-11-17 13:01 André Berggren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200511141619.31441.sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox