[U-Boot-Users] IXP425 processor

[U-Boot-Users] IXP425 processor

[Martijn de Gouw]

> -----Original Message-----
> From: u-boot-users-admin at lists.sourceforge.net 
> [mailto:u-boot-users-admin at lists.sourceforge.net] On Behalf Of Frank
> Sent: woensdag 25 januari 2006 3:23
> To: u-boot-users at lists.sourceforge.net
> Subject: [U-Boot-Users] IXP425 processor
> 
> Does the EDK4.0 cross toolchain support the IXP425 Xscale
> processor?
> 

Yes, use the arm toolchain

Regards, martijn

[U-Boot-Users] IXP425 processor

[Stefan Roese]

On Wednesday 25 January 2006 16:27, Martijn de Gouw wrote:
> > Does the EDK4.0 cross toolchain support the IXP425 Xscale
> > processor?
>
> Yes, use the arm toolchain

I am afraid, but ELDK 4.0 doesn't have an arm toolchain right now. Might come 
in a future release. But the ELDK 3.1.1 has an arm toolchain which can be 
used for ARM U-Boot ports.

Best regards,
Stefan

[U-Boot-Users] IXP425 processor

[Frank]

--- Stefan Roese <sr@denx.de> wrote:

> On Wednesday 25 January 2006 16:27, Martijn de Gouw wrote:
> > > Does the EDK4.0 cross toolchain support the IXP425 Xscale
> > > processor?
> >
> > Yes, use the arm toolchain
> 
> I am afraid, but ELDK 4.0 doesn't have an arm toolchain right
> now. Might come 
> in a future release. But the ELDK 3.1.1 has an arm toolchain
> which can be 
> used for ARM U-Boot ports.
> 
> Best regards,
> Stefan

Thanks,
I'm assuming there won't be problem using the 3.1.1 ELDK with
the 2.6 kernel, correct?

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[U-Boot-Users] IXP425 processor

[Stefan Roese]

Hi Frank,

On Wednesday 25 January 2006 16:51, Frank wrote:
> I'm assuming there won't be problem using the 3.1.1 ELDK with
> the 2.6 kernel, correct?

Sorry but ELDK 3.1.1 uses gcc 3.3.3 which seems to be a too old for the recent 
2.6.15er kernels.

But as Martin mentioned, a arm version of the ELDK 4.0 toolchain is available. 
Please give it a try.

Best regards,
Stefan

[U-Boot-Users] IXP425 processor

[Wolfgang Denk]

In message <20060125155138.81546.qmail@web32207.mail.mud.yahoo.com> you wrote:
> 
> I'm assuming there won't be problem using the 3.1.1 ELDK with
> the 2.6 kernel, correct?

I didn't try for ARM, but there may be trouble ahead -  for  example,
it definitely does not work any more for PowerPC (binutils too old).

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The Buddha, the Godhead, resides quite as comfortably in the circuits
of a digital computer or the gears of a cycle transmission as he does
at the top of a mountain or in the petals of a flower.
            - R.  Pirsig, "Zen and the Art of Motorcycle Maintenance"

[U-Boot-Users] IXP425 processor

[Frank]

--- Wolfgang Denk <wd@denx.de> wrote:

> In message
> <20060125155138.81546.qmail@web32207.mail.mud.yahoo.com> you
> wrote:
> > 
> > I'm assuming there won't be problem using the 3.1.1 ELDK
> with
> > the 2.6 kernel, correct?
> 
> I didn't try for ARM, but there may be trouble ahead -  for 
> example,
> it definitely does not work any more for PowerPC (binutils too
> old).
> 
> Best regards,
> 
> Wolfgang Denk

Actually, I'm using 4.0 for powerPc so that is not a probelm. I
have a project coming up which will require me to cross tools
for IXP425. I'll see if they (4.0 on ARM) work for the 2.6
kernel when the board comes in...

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[U-Boot-Users] IXP425 processor

[Wolfgang Denk]

In message <20060125214917.32317.qmail@web32212.mail.mud.yahoo.com> you wrote:
> 
> for IXP425. I'll see if they (4.0 on ARM) work for the 2.6
> kernel when the board comes in...

They should work fine. That's what we've tested.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The typical page layout program is nothing more  than  an  electronic
light table for cutting and pasting documents.

[U-Boot-Users] IXP425 processor

[Frank]

--- Wolfgang Denk <wd@denx.de> wrote:

> In message
> <20060125214917.32317.qmail@web32212.mail.mud.yahoo.com> you
> wrote:
> > 
> > for IXP425. I'll see if they (4.0 on ARM) work for the 2.6
> > kernel when the board comes in...
> 
> They should work fine. That's what we've tested.
> 
> Best regards,
> 
> Wolfgang Denk

Great...

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[U-Boot-Users] IXP425 processor

[Wolfgang Denk]

In message <200601251638.48085.sr@denx.de> you wrote:
>
> I am afraid, but ELDK 4.0 doesn't have an arm toolchain right now. Might come 

Stefan, you should know better ;-)

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I am a computer. I am dumber than any human and smarter than any  ad-
ministrator.

[U-Boot-Users] IXP425 processor

[Martin Krause]

u-boot-users-admin at lists.sourceforge.net wrote on :
> On Wednesday 25 January 2006 16:27, Martijn de Gouw wrote:
> > > Does the EDK4.0 cross toolchain support the IXP425 Xscale
> > > processor?
> > 
> > Yes, use the arm toolchain
> 
> I am afraid, but ELDK 4.0 doesn't have an arm toolchain right now.
> Might come in a future release. But the ELDK 3.1.1 has an arm
> toolchain which can be used for ARM U-Boot ports.

Oh? I just installed ELDK 4.0 for arm (the arm-2006-01-16.iso)
and did a MAKEALL for an arm board (cmc_pu2). There was a bunch of 
new compiler warnings, but nevertheless I got an u-boot.bin image. 
A not working image, though :(

Regards,
Martin

[U-Boot-Users] IXP425 processor

[Stefan Roese]

Hi Martin,

On Wednesday 25 January 2006 18:10, Martin Krause wrote:
> > I am afraid, but ELDK 4.0 doesn't have an arm toolchain right now.
> > Might come in a future release. But the ELDK 3.1.1 has an arm
> > toolchain which can be used for ARM U-Boot ports.
>
> Oh? I just installed ELDK 4.0 for arm (the arm-2006-01-16.iso)

Hey! I didn't know this. So even in our small company the information flow is 
not that good. ;-)

Viele Gr??e,
Stefan

[U-Boot-Users] IXP425 processor

[Frank]

Does the EDK4.0 cross toolchain support the IXP425 Xscale
processor?




__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com