* [U-Boot-Users] transmission just works in loopback mode
@ 2006-02-23 18:39 Josef Angermeier
0 siblings, 0 replies; only message in thread
From: Josef Angermeier @ 2006-02-23 18:39 UTC (permalink / raw)
To: u-boot
Dear u-boot users,
i used the MPC875 FEC internal loopback mode and the external
transceiver-loopback mode. In both cases i could send *and* receive the
data.
But when using no loopback at all, but a (working) crossover cable to
connect the board to a second PC (see below), no packets get received
there. Where could the failure be ?
MPC875 <-> transceiver(LTX970) <-> RJ45-connector <-> crossover
-cable <-> second PC with RJ54-connector
my custom board contains a MPC875, whose FEC is connected to a LTX970
transceiver chip, which uses a twisted pair cable interface.
best regards
Josef
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-02-23 18:39 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-02-23 18:39 [U-Boot-Users] transmission just works in loopback mode Josef Angermeier
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox