[U-Boot-Users] U-Boot on 440EP Bamboo board, anybody succeed?

[U-Boot-Users] U-Boot on 440EP Bamboo board, anybody succeed?

[Andriy Korud]

> 
> You have to set the MAC addresse(s) and reset the board. 
> After this both enet devices will be available.

Thanks, it helps.
 
> > In PIBS works. 2. When trying to boot uImage (loaded via 
> USB, as eth 
> > doesn't work), it just hang after "Uncompressing Kernel 
> Image ... OK". 
> > The same bzImage runs in PIBS. U-Boot 1.1.4, Linux 2.6.16, compiled 
> > with gcc 3.4.5.
> 
> Please give the DENX linux images a try:
> 
> ftp://ftp.denx.de/pub/linux/images/amcc/bamboo/
> 
U-Boot 1.1.4 (Dec  5 2005 - 16:21:22) (binary image downloaded from
above URL)
No success, hangs afret "Uncompressing Kernel Image ... OK"

Regards,
Andriy Korud

[U-Boot-Users] U-Boot on 440EP Bamboo board, anybody succeed?

[Stefan Roese]

Hi Andriy,

On Friday, 14. April 2006 10:34, Andriy Korud wrote:
> > You have to set the MAC addresse(s) and reset the board.
> > After this both enet devices will be available.
>
> Thanks, it helps.

OK.

> > > The same bzImage runs in PIBS. U-Boot 1.1.4, Linux 2.6.16, compiled
> > > with gcc 3.4.5.
> >
> > Please give the DENX linux images a try:
> >
> > ftp://ftp.denx.de/pub/linux/images/amcc/bamboo/
>
> U-Boot 1.1.4 (Dec  5 2005 - 16:21:22) (binary image downloaded from
> above URL)
> No success, hangs afret "Uncompressing Kernel Image ... OK"

Hmmm. Should work. What is the content of the env variable bootargs upon 
booting the kernel. Did you pass all needed info to the kernel (ttySx, 
baudrate...)?

Best regards,
Stefan

[U-Boot-Users] U-Boot on 440EP Bamboo board, anybody succeed?

[Andriy Korud]

>Hmmm. Should work. What is the content of the env variable bootargs upon 
>booting the kernel. Did you pass all needed info to the kernel (ttySx, 
>baudrate...)?

Thanks for the tips. bootargs was no set at all (I was using plain bootm). 

regards,
Andriy Korud

[U-Boot-Users] U-Boot on 440EP Bamboo board, anybody succeed?

[Wolfgang Denk]

In message <60E856FD577CC04BA3727AF4122D3F160106FDD9@3bit.vector.com.pl> you wrote:
>
> U-Boot 1.1.4 (Dec  5 2005 - 16:21:22) (binary image downloaded from
> above URL)
> No success, hangs afret "Uncompressing Kernel Image ... OK"

But this is most probably not an U-Boot probl;em. Where did  you  get
your  kernel  image from? [Hint: there is a working image just in the
neigbour directory on the same server; just s/u-boot/linux/ ].

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A Puritan is someone who is deathly afraid that  someone,  somewhere,
is having fun.

[U-Boot-Users] U-Boot on 440EP Bamboo board, anybody succeed?

[Andriy Korud]

Hi,
I'm trying to run U-Boot 1.1.4 on original 440EP Bamboo board and have two major problems:
1. Ethernets don't work, just "Net:   No ethernet found" on boot. In PIBS works.
2. When trying to boot uImage (loaded via USB, as eth doesn't work), it just hang after "Uncompressing Kernel Image ... OK". The same bzImage runs in PIBS.
U-Boot 1.1.4, Linux 2.6.16, compiled with gcc 3.4.5.
 
Does anybody succeed to run U-Boot on this board?
 
thanks in advance,
--
Andriy Korud

[U-Boot-Users] U-Boot on 440EP Bamboo board, anybody succeed?

[Wolfgang Denk]

In message <60E856FD577CC04BA3727AF4122D3F1601238503@3bit.vector.com.pl> you wrote:
>
> I'm trying to run U-Boot 1.1.4 on original 440EP Bamboo board and have

Which git commit ID is your version of U-Boot?

> Does anybody succeed to run U-Boot on this board?

Yes, of course. We have U-Boot running fine on this  board.  You  can
find working images on our FTP server, see
ftp://ftp.denx.de/pub/u-boot/images/amcc/bamboo/

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
What is mind?  No matter.  What is matter?  Never mind.
                                      -- Thomas Hewitt Key, 1799-1875

[U-Boot-Users] U-Boot on 440EP Bamboo board, anybody succeed?

[Stefan Roese]

Hi Andriy,

On Wednesday, 12. April 2006 18:29, Andriy Korud wrote:
> I'm trying to run U-Boot 1.1.4 on original 440EP Bamboo board and have two
> major problems: 1. Ethernets don't work, just "Net:   No ethernet found" on
> boot.

You have to set the MAC addresse(s) and reset the board. After this both enet 
devices will be available.

> In PIBS works. 2. When trying to boot uImage (loaded via USB, as eth 
> doesn't work), it just hang after "Uncompressing Kernel Image ... OK". The
> same bzImage runs in PIBS. U-Boot 1.1.4, Linux 2.6.16, compiled with gcc
> 3.4.5.

Please give the DENX linux images a try:

ftp://ftp.denx.de/pub/linux/images/amcc/bamboo/

They definitely work here on a baboo.

Best regards,
Stefan