* [U-Boot-Users] Intel P30, HowTo?
@ 2006-05-11 10:46 Konstantin Kletschke
2006-05-11 16:22 ` Wolfgang Denk
0 siblings, 1 reply; 10+ messages in thread
From: Konstantin Kletschke @ 2006-05-11 10:46 UTC (permalink / raw)
To: u-boot
Again ;)
After switching to CFI flash driver with yesterday's git tree I am
trying to get intel P30 flash device running.
I use the most actual code because of
Wolfgang told to do so in
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/20899/match=p30
flinfo does not look too bad indeed:
Bank # 1: CFI conformant FLASH (8 x 8) Size: 0 MB in 259 Sectors
Erase timeout 1 ms, write timeout 1 ms, buffer write timeout 0 ms, buffer size 1024
Sector Start Addresses:
10000000 (RO) 10008000 (RO) 10010000 (RO) 10018000 (RO) 10020000
10040000 10060000 (RO) 10080000 (RO) 100A0000 100C0000
100E0000 (RO) 10100000 (RO) 10120000 (RO) 10140000 (RO) 10160000 (RO)
10180000 (RO) 101A0000 (RO) 101C0000 (RO) 101E0000 (RO) 10200000 (RO)
10220000 (RO) 10240000 (RO) 10260000 (RO) 10280000 (RO) 102A0000 (RO)
102C0000 (RO) 102E0000 (RO) 10300000 (RO) 10320000 (RO) 10340000 (RO)
10360000 (RO) 10380000 (RO) 103A0000 (RO) 103C0000 (RO) 103E0000 (RO)
10400000 (RO) 10420000 (RO) 10440000 (RO) 10460000 (RO) 10480000 (RO)
104A0000 (RO) 104C0000 (RO) 104E0000 (RO) 10500000 (RO) 10520000 (RO)
10540000 (RO) 10560000 (RO) 10580000 (RO) 105A0000 (RO) 105C0000 (RO)
105E0000 (RO) 10600000 (RO) 10620000 (RO) 10640000 (RO) 10660000 (RO)
10680000 (RO) 106A0000 (RO) 106C0000 (RO) 106E0000 (RO) 10700000 (RO)
10720000 (RO) 10740000 (RO) 10760000 (RO) 10780000 (RO) 107A0000 (RO)
107C0000 (RO) 107E0000 (RO) 10800000 (RO) 10820000 (RO) 10840000 (RO)
10860000 (RO) 10880000 (RO) 108A0000 (RO) 108C0000 (RO) 108E0000 (RO)
10900000 (RO) 10920000 (RO) 10940000 (RO) 10960000 (RO) 10980000 (RO)
109A0000 (RO) 109C0000 (RO) 109E0000 (RO) 10A00000 (RO) 10A20000 (RO)
10A40000 (RO) 10A60000 (RO) 10A80000 (RO) 10AA0000 (RO) 10AC0000 (RO)
10AE0000 (RO) 10B00000 (RO) 10B20000 (RO) 10B40000 (RO) 10B60000 (RO)
10B80000 (RO) 10BA0000 (RO) 10BC0000 (RO) 10BE0000 (RO) 10C00000 (RO)
10C20000 (RO) 10C40000 (RO) 10C60000 (RO) 10C80000 (RO) 10CA0000 (RO)
10CC0000 (RO) 10CE0000 (RO) 10D00000 (RO) 10D20000 (RO) 10D40000 (RO)
10D60000 (RO) 10D80000 (RO) 10DA0000 (RO) 10DC0000 (RO) 10DE0000 (RO)
10E00000 (RO) 10E20000 (RO) 10E40000 (RO) 10E60000 (RO) 10E80000 (RO)
10EA0000 (RO) 10EC0000 (RO) 10EE0000 (RO) 10F00000 (RO) 10F20000 (RO)
10F40000 (RO) 10F60000 (RO) 10F80000 (RO) 10FA0000 (RO) 10FC0000 (RO)
10FE0000 (RO) 11000000 (RO) 11020000 (RO) 11040000 (RO) 11060000 (RO)
11080000 (RO) 110A0000 (RO) 110C0000 (RO) 110E0000 (RO) 11100000 (RO)
11120000 (RO) 11140000 (RO) 11160000 (RO) 11180000 (RO) 111A0000 (RO)
111C0000 (RO) 111E0000 (RO) 11200000 (RO) 11220000 (RO) 11240000 (RO)
11260000 (RO) 11280000 (RO) 112A0000 (RO) 112C0000 (RO) 112E0000 (RO)
11300000 (RO) 11320000 (RO) 11340000 (RO) 11360000 (RO) 11380000 (RO)
113A0000 (RO) 113C0000 (RO) 113E0000 (RO) 11400000 (RO) 11420000 (RO)
11440000 (RO) 11460000 (RO) 11480000 (RO) 114A0000 (RO) 114C0000 (RO)
114E0000 (RO) 11500000 (RO) 11520000 (RO) 11540000 (RO) 11560000 (RO)
11580000 (RO) 115A0000 (RO) 115C0000 (RO) 115E0000 (RO) 11600000 (RO)
11620000 (RO) 11640000 (RO) 11660000 (RO) 11680000 (RO) 116A0000 (RO)
116C0000 (RO) 116E0000 (RO) 11700000 (RO) 11720000 (RO) 11740000 (RO)
11760000 (RO) 11780000 (RO) 117A0000 (RO) 117C0000 (RO) 117E0000 (RO)
11800000 (RO) 11820000 (RO) 11840000 (RO) 11860000 (RO) 11880000 (RO)
118A0000 (RO) 118C0000 (RO) 118E0000 (RO) 11900000 (RO) 11920000 (RO)
11940000 (RO) 11960000 (RO) 11980000 (RO) 119A0000 (RO) 119C0000 (RO)
119E0000 (RO) 11A00000 (RO) 11A20000 (RO) 11A40000 (RO) 11A60000 (RO)
11A80000 (RO) 11AA0000 (RO) 11AC0000 (RO) 11AE0000 (RO) 11B00000 (RO)
11B20000 (RO) 11B40000 (RO) 11B60000 (RO) 11B80000 (RO) 11BA0000 (RO)
11BC0000 (RO) 11BE0000 (RO) 11C00000 (RO) 11C20000 (RO) 11C40000 (RO)
11C60000 (RO) 11C80000 (RO) 11CA0000 (RO) 11CC0000 (RO) 11CE0000 (RO)
11D00000 (RO) 11D20000 (RO) 11D40000 (RO) 11D60000 (RO) 11D80000 (RO)
11DA0000 (RO) 11DC0000 (RO) 11DE0000 (RO) 11E00000 (RO) 11E20000 (RO)
11E40000 (RO) 11E60000 (RO) 11E80000 (RO) 11EA0000 (RO) 11EC0000 (RO)
11EE0000 (RO) 11F00000 (RO) 11F20000 (RO) 11F40000 (RO) 11F60000 (RO)
11F80000 (RO) 11010101 (RO) 11FC0000 (RO) 11FE0000
Well, not too means:
scb9328> erase 1:5
Erase Flash Sectors 5-5 in Bank # 1
Flash erase timeout at address 10040000 data 0
done
A protect off 1:5 looks fine and unlocks sector at
0x10040000 (reported by flinfo).
Trying to cp.b to the sector returns to prompt immediately and leaves
0xff there.
Additionally look at last line second sector address.
Regards, Konsti
--
GPG KeyID EF62FCEF
Fingerprint: 13C9 B16B 9844 EC15 CC2E A080 1E69 3FDA EF62 FCEF
^ permalink raw reply [flat|nested] 10+ messages in thread* [U-Boot-Users] Intel P30, HowTo?
2006-05-11 10:46 [U-Boot-Users] Intel P30, HowTo? Konstantin Kletschke
@ 2006-05-11 16:22 ` Wolfgang Denk
2006-05-11 16:52 ` [U-Boot-Users] PCI pci_read_config_word k bisla
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Wolfgang Denk @ 2006-05-11 16:22 UTC (permalink / raw)
To: u-boot
In message <20060511104642.GA11415@synertronixx3> you wrote:
>
> After switching to CFI flash driver with yesterday's git tree I am
> trying to get intel P30 flash device running.
...
> flinfo does not look too bad indeed:
...
> 11F80000 (RO) 11010101 (RO) 11FC0000 (RO) 11FE0000
...
> Additionally look at last line second sector address.
Are you sure that your board configuration is OK? Checked your
CFG_MAX_FLASH_SECT definiton?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Do you know about being with somebody? Wanting to be? If I had the
whole universe, I'd give it to you, Janice. When I see you, I feel
like I'm hungry all over. Do you know how that feels?
-- Charlie Evans, "Charlie X", stardate 1535.8
^ permalink raw reply [flat|nested] 10+ messages in thread* [U-Boot-Users] PCI pci_read_config_word
2006-05-11 16:22 ` Wolfgang Denk
@ 2006-05-11 16:52 ` k bisla
2006-05-12 5:38 ` Sam Song
2006-05-12 6:16 ` [U-Boot-Users] Intel P30, HowTo? Stefan Roese
2006-05-12 8:37 ` Konstantin Kletschke
2 siblings, 1 reply; 10+ messages in thread
From: k bisla @ 2006-05-11 16:52 UTC (permalink / raw)
To: u-boot
Hi,
this may sound like a silly question but none the less...
In pci.h all the functions are extern can you point me to the file where
they are actually defined. tried to seach for it but couldn't find it.
Thanks
-Kunal
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot-Users] Intel P30, HowTo?
2006-05-11 16:22 ` Wolfgang Denk
2006-05-11 16:52 ` [U-Boot-Users] PCI pci_read_config_word k bisla
@ 2006-05-12 6:16 ` Stefan Roese
2006-05-12 8:37 ` Konstantin Kletschke
2 siblings, 0 replies; 10+ messages in thread
From: Stefan Roese @ 2006-05-12 6:16 UTC (permalink / raw)
To: u-boot
Hi Konstantin,
On Thursday 11 May 2006 18:22, Wolfgang Denk wrote:
> Are you sure that your board configuration is OK? Checked your
> CFG_MAX_FLASH_SECT definiton?
Any news on this? Did you set the environment variable "unlock" to "yes"?
Please send a more details error description, if you still experience some
problems. Or even better a patch for it. ;-)
Best regards,
Stefan
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot-Users] Intel P30, HowTo?
2006-05-11 16:22 ` Wolfgang Denk
2006-05-11 16:52 ` [U-Boot-Users] PCI pci_read_config_word k bisla
2006-05-12 6:16 ` [U-Boot-Users] Intel P30, HowTo? Stefan Roese
@ 2006-05-12 8:37 ` Konstantin Kletschke
2006-05-12 12:21 ` Wolfgang Denk
2 siblings, 1 reply; 10+ messages in thread
From: Konstantin Kletschke @ 2006-05-12 8:37 UTC (permalink / raw)
To: u-boot
Am 2006-05-11 18:22 +0200 schrieb Wolfgang Denk:
> Are you sure that your board configuration is OK? Checked your
> CFG_MAX_FLASH_SECT definiton?
ARGH! The value was too less.
Bank # 1: CFI conformant FLASH (16 x 16) Size: 32 MB in 259 Sectors
Erase timeout 4096 ms, write timeout 1 ms, buffer write timeout 2 ms, buffer size 64
Sector Start Addresses:
10000000 (RO) 10008000 (RO) 10010000 (RO) 10018000 (RO) 10020000 (RO)
10040000 (RO) 10060000 (RO) 10080000 (RO) 100A0000 (RO) 100C0000 (RO)
100E0000 (RO) 10100000 (RO) 10120000 (RO) 10140000 (RO) 10160000 (RO)
10180000 (RO) 101A0000 (RO) 101C0000 (RO) 101E0000 (RO) 10200000 (RO)
10220000 (RO) 10240000 (RO) 10260000 (RO) 10280000 (RO) 102A0000 (RO)
102C0000 (RO) 102E0000 (RO) 10300000 (RO) 10320000 (RO) 10340000 (RO)
10360000 (RO) 10380000 (RO) 103A0000 (RO) 103C0000 (RO) 103E0000 (RO)
10400000 (RO) 10420000 (RO) 10440000 (RO) 10460000 (RO) 10480000 (RO)
104A0000 (RO) 104C0000 (RO) 104E0000 (RO) 10500000 (RO) 10520000 (RO)
10540000 (RO) 10560000 (RO) 10580000 (RO) 105A0000 (RO) 105C0000 (RO)
105E0000 (RO) 10600000 (RO) 10620000 (RO) 10640000 (RO) 10660000 (RO)
10680000 (RO) 106A0000 (RO) 106C0000 (RO) 106E0000 (RO) 10700000 (RO)
10720000 (RO) 10740000 (RO) 10760000 (RO) 10780000 (RO) 107A0000 (RO)
107C0000 (RO) 107E0000 (RO) 10800000 (RO) 10820000 (RO) 10840000 (RO)
10860000 (RO) 10880000 (RO) 108A0000 (RO) 108C0000 (RO) 108E0000 (RO)
10900000 (RO) 10920000 (RO) 10940000 (RO) 10960000 (RO) 10980000 (RO)
109A0000 (RO) 109C0000 (RO) 109E0000 (RO) 10A00000 (RO) 10A20000 (RO)
10A40000 (RO) 10A60000 (RO) 10A80000 (RO) 10AA0000 (RO) 10AC0000 (RO)
10AE0000 (RO) 10B00000 (RO) 10B20000 (RO) 10B40000 (RO) 10B60000 (RO)
10B80000 (RO) 10BA0000 (RO) 10BC0000 (RO) 10BE0000 (RO) 10C00000 (RO)
10C20000 (RO) 10C40000 (RO) 10C60000 (RO) 10C80000 (RO) 10CA0000 (RO)
10CC0000 (RO) 10CE0000 (RO) 10D00000 (RO) 10D20000 (RO) 10D40000 (RO)
10D60000 (RO) 10D80000 (RO) 10DA0000 (RO) 10DC0000 (RO) 10DE0000 (RO)
10E00000 (RO) 10E20000 (RO) 10E40000 (RO) 10E60000 (RO) 10E80000 (RO)
10EA0000 (RO) 10EC0000 (RO) 10EE0000 (RO) 10F00000 (RO) 10F20000 (RO)
10F40000 (RO) 10F60000 (RO) 10F80000 (RO) 10FA0000 (RO) 10FC0000 (RO)
10FE0000 (RO) 11000000 (RO) 11020000 (RO) 11040000 (RO) 11060000 (RO)
11080000 (RO) 110A0000 (RO) 110C0000 (RO) 110E0000 (RO) 11100000 (RO)
11120000 (RO) 11140000 (RO) 11160000 (RO) 11180000 (RO) 111A0000 (RO)
111C0000 (RO) 111E0000 (RO) 11200000 (RO) 11220000 (RO) 11240000 (RO)
11260000 (RO) 11280000 (RO) 112A0000 (RO) 112C0000 (RO) 112E0000 (RO)
11300000 (RO) 11320000 (RO) 11340000 (RO) 11360000 (RO) 11380000 (RO)
113A0000 (RO) 113C0000 (RO) 113E0000 (RO) 11400000 (RO) 11420000 (RO)
11440000 (RO) 11460000 (RO) 11480000 (RO) 114A0000 (RO) 114C0000 (RO)
114E0000 (RO) 11500000 (RO) 11520000 (RO) 11540000 (RO) 11560000 (RO)
11580000 (RO) 115A0000 (RO) 115C0000 (RO) 115E0000 (RO) 11600000 (RO)
11620000 (RO) 11640000 (RO) 11660000 (RO) 11680000 (RO) 116A0000 (RO)
116C0000 (RO) 116E0000 (RO) 11700000 (RO) 11720000 (RO) 11740000 (RO)
11760000 (RO) 11780000 (RO) 117A0000 (RO) 117C0000 (RO) 117E0000 (RO)
11800000 (RO) 11820000 (RO) 11840000 (RO) 11860000 (RO) 11880000 (RO)
118A0000 (RO) 118C0000 (RO) 118E0000 (RO) 11900000 (RO) 11920000 (RO)
11940000 (RO) 11960000 (RO) 11980000 (RO) 119A0000 (RO) 119C0000 (RO)
119E0000 (RO) 11A00000 (RO) 11A20000 (RO) 11A40000 (RO) 11A60000 (RO)
11A80000 (RO) 11AA0000 (RO) 11AC0000 (RO) 11AE0000 (RO) 11B00000 (RO)
11B20000 (RO) 11B40000 (RO) 11B60000 (RO) 11B80000 (RO) 11BA0000 (RO)
11BC0000 (RO) 11BE0000 (RO) 11C00000 (RO) 11C20000 (RO) 11C40000 (RO)
11C60000 (RO) 11C80000 (RO) 11CA0000 (RO) 11CC0000 (RO) 11CE0000 (RO)
11D00000 (RO) 11D20000 (RO) 11D40000 (RO) 11D60000 (RO) 11D80000 (RO)
11DA0000 (RO) 11DC0000 (RO) 11DE0000 (RO) 11E00000 (RO) 11E20000 (RO)
11E40000 (RO) 11E60000 (RO) 11E80000 (RO) 11EA0000 (RO) 11EC0000 (RO)
11EE0000 (RO) 11F00000 (RO) 11F20000 (RO) 11F40000 (RO) 11F60000 (RO)
11F80000 (RO) 11FA0000 (RO) 11FC0000 (RO) 11FE0000 (RO)
scb9328>
Now it unlocks erases and programs the flash fine so far.
But what is this variable for?
flinfo gets the right capacity and number of sectors automatically.
Is it harmful the variable being too big? I have
CFG_MAX_FLASH_SECT set to 266 now, because I don't now the number of
sectors of p30 flash exactly...
Now jffs2 of 2.6.14 crashes in jffs2_scan_medium, but I have to check
this with the kernel guys...
Regards, Konsti
--
GPG KeyID EF62FCEF
Fingerprint: 13C9 B16B 9844 EC15 CC2E A080 1E69 3FDA EF62 FCEF
^ permalink raw reply [flat|nested] 10+ messages in thread* [U-Boot-Users] Intel P30, HowTo?
2006-05-12 8:37 ` Konstantin Kletschke
@ 2006-05-12 12:21 ` Wolfgang Denk
2006-05-12 14:50 ` Konstantin Kletschke
0 siblings, 1 reply; 10+ messages in thread
From: Wolfgang Denk @ 2006-05-12 12:21 UTC (permalink / raw)
To: u-boot
Dear Konstatntin,
[Please keep the list on Cc: - thanks.]
In message <20060512083731.GB18479@ku-gbr.de> you wrote:
>
> > Are you sure that your board configuration is OK? Checked your
> > CFG_MAX_FLASH_SECT definiton?
>
> ARGH! The value was too less.
Yeah, the symptoms looked like writing out of the bounds of the array.
> Now it unlocks erases and programs the flash fine so far.
> But what is this variable for?
It defines the size of the array which holds the flash information.
It's statically allocated.
> flinfo gets the right capacity and number of sectors automatically.
When I wrote that code I decided to use a static array because this
results in a smaller code size... Not a big issue on most boards, but
a piece of the puzzle on a few.
> Is it harmful the variable being too big? I have
You waste a little memory, that's all.
> CFG_MAX_FLASH_SECT set to 266 now, because I don't now the number of
> sectors of p30 flash exactly...
Look it up in the data sheet!
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Probably the best operating system in the world is the [operating
system] made for the PDP-11 by Bell Laboratories."
- Ted Nelson, October 1977
^ permalink raw reply [flat|nested] 10+ messages in thread* [U-Boot-Users] Intel P30, HowTo?
2006-05-12 12:21 ` Wolfgang Denk
@ 2006-05-12 14:50 ` Konstantin Kletschke
2006-05-13 13:29 ` Wolfgang Denk
0 siblings, 1 reply; 10+ messages in thread
From: Konstantin Kletschke @ 2006-05-12 14:50 UTC (permalink / raw)
To: u-boot
Am 2006-05-12 14:21 +0200 schrieb Wolfgang Denk:
> [Please keep the list on Cc: - thanks.]
This was by accident and I bounced a copy to ML immediately.
Weird is it doesn't show up here yet o_O
> Yeah, the symptoms looked like writing out of the bounds of the array.
Yes, indeed.
> > Is it harmful the variable being too big? I have
>
> You waste a little memory, that's all.
Ok, that was my vague idea of this also.
> Look it up in the data sheet!
:-P
Thanks for pointing out some details of the code :)
Kind regards, Konsti
--
GPG KeyID EF62FCEF
Fingerprint: 13C9 B16B 9844 EC15 CC2E A080 1E69 3FDA EF62 FCEF
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot-Users] Intel P30, HowTo?
2006-05-12 14:50 ` Konstantin Kletschke
@ 2006-05-13 13:29 ` Wolfgang Denk
0 siblings, 0 replies; 10+ messages in thread
From: Wolfgang Denk @ 2006-05-13 13:29 UTC (permalink / raw)
To: u-boot
In message <20060512145007.GA30889@synertronixx3> you wrote:
>
> This was by accident and I bounced a copy to ML immediately.
> Weird is it doesn't show up here yet o_O
Once more one of SourceForge's "services". See for example here:
Received: from sc8-sf-list1-b.sourceforge.net (sc8-sf-list1-b.sourceforge.net [10.3.1.7])
by sc8-sf-spam2.sourceforge.net (Postfix) with ESMTP
id B22A813D0A; Sat, 13 May 2006 04:46:33 -0700 (PDT)
Received: from [10.3.1.93] (helo=sc8-sf-list1-new.sourceforge.net)
by sc8-sf-list1.sourceforge.net with esmtp (Exim 4.30)
id 1FectN-0005IC-GF
for u-boot-users at lists.sourceforge.net; Fri, 12 May 2006 12:01:37 -0700
Nearly 17 hours of delay just between two internal mail servers
there...
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
PLEASE NOTE: Some Quantum Physics Theories Suggest That When the Con-
sumer Is Not Directly Observing This Product, It May Cease to Exist
or Will Exist Only in a Vague and Undetermined State.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot-Users] Intel P30, HowTo?
@ 2006-05-12 9:22 Konstantin Kletschke
0 siblings, 0 replies; 10+ messages in thread
From: Konstantin Kletschke @ 2006-05-12 9:22 UTC (permalink / raw)
To: u-boot
Am 2006-05-11 18:22 +0200 schrieb Wolfgang Denk:
> Are you sure that your board configuration is OK? Checked your
> CFG_MAX_FLASH_SECT definiton?
ARGH! The value was too less.
Bank # 1: CFI conformant FLASH (16 x 16) Size: 32 MB in 259 Sectors
Erase timeout 4096 ms, write timeout 1 ms, buffer write timeout 2 ms, buffer size 64
Sector Start Addresses:
10000000 (RO) 10008000 (RO) 10010000 (RO) 10018000 (RO) 10020000 (RO)
10040000 (RO) 10060000 (RO) 10080000 (RO) 100A0000 (RO) 100C0000 (RO)
100E0000 (RO) 10100000 (RO) 10120000 (RO) 10140000 (RO) 10160000 (RO)
10180000 (RO) 101A0000 (RO) 101C0000 (RO) 101E0000 (RO) 10200000 (RO)
10220000 (RO) 10240000 (RO) 10260000 (RO) 10280000 (RO) 102A0000 (RO)
102C0000 (RO) 102E0000 (RO) 10300000 (RO) 10320000 (RO) 10340000 (RO)
10360000 (RO) 10380000 (RO) 103A0000 (RO) 103C0000 (RO) 103E0000 (RO)
10400000 (RO) 10420000 (RO) 10440000 (RO) 10460000 (RO) 10480000 (RO)
104A0000 (RO) 104C0000 (RO) 104E0000 (RO) 10500000 (RO) 10520000 (RO)
10540000 (RO) 10560000 (RO) 10580000 (RO) 105A0000 (RO) 105C0000 (RO)
105E0000 (RO) 10600000 (RO) 10620000 (RO) 10640000 (RO) 10660000 (RO)
10680000 (RO) 106A0000 (RO) 106C0000 (RO) 106E0000 (RO) 10700000 (RO)
10720000 (RO) 10740000 (RO) 10760000 (RO) 10780000 (RO) 107A0000 (RO)
107C0000 (RO) 107E0000 (RO) 10800000 (RO) 10820000 (RO) 10840000 (RO)
10860000 (RO) 10880000 (RO) 108A0000 (RO) 108C0000 (RO) 108E0000 (RO)
10900000 (RO) 10920000 (RO) 10940000 (RO) 10960000 (RO) 10980000 (RO)
109A0000 (RO) 109C0000 (RO) 109E0000 (RO) 10A00000 (RO) 10A20000 (RO)
10A40000 (RO) 10A60000 (RO) 10A80000 (RO) 10AA0000 (RO) 10AC0000 (RO)
10AE0000 (RO) 10B00000 (RO) 10B20000 (RO) 10B40000 (RO) 10B60000 (RO)
10B80000 (RO) 10BA0000 (RO) 10BC0000 (RO) 10BE0000 (RO) 10C00000 (RO)
10C20000 (RO) 10C40000 (RO) 10C60000 (RO) 10C80000 (RO) 10CA0000 (RO)
10CC0000 (RO) 10CE0000 (RO) 10D00000 (RO) 10D20000 (RO) 10D40000 (RO)
10D60000 (RO) 10D80000 (RO) 10DA0000 (RO) 10DC0000 (RO) 10DE0000 (RO)
10E00000 (RO) 10E20000 (RO) 10E40000 (RO) 10E60000 (RO) 10E80000 (RO)
10EA0000 (RO) 10EC0000 (RO) 10EE0000 (RO) 10F00000 (RO) 10F20000 (RO)
10F40000 (RO) 10F60000 (RO) 10F80000 (RO) 10FA0000 (RO) 10FC0000 (RO)
10FE0000 (RO) 11000000 (RO) 11020000 (RO) 11040000 (RO) 11060000 (RO)
11080000 (RO) 110A0000 (RO) 110C0000 (RO) 110E0000 (RO) 11100000 (RO)
11120000 (RO) 11140000 (RO) 11160000 (RO) 11180000 (RO) 111A0000 (RO)
111C0000 (RO) 111E0000 (RO) 11200000 (RO) 11220000 (RO) 11240000 (RO)
11260000 (RO) 11280000 (RO) 112A0000 (RO) 112C0000 (RO) 112E0000 (RO)
11300000 (RO) 11320000 (RO) 11340000 (RO) 11360000 (RO) 11380000 (RO)
113A0000 (RO) 113C0000 (RO) 113E0000 (RO) 11400000 (RO) 11420000 (RO)
11440000 (RO) 11460000 (RO) 11480000 (RO) 114A0000 (RO) 114C0000 (RO)
114E0000 (RO) 11500000 (RO) 11520000 (RO) 11540000 (RO) 11560000 (RO)
11580000 (RO) 115A0000 (RO) 115C0000 (RO) 115E0000 (RO) 11600000 (RO)
11620000 (RO) 11640000 (RO) 11660000 (RO) 11680000 (RO) 116A0000 (RO)
116C0000 (RO) 116E0000 (RO) 11700000 (RO) 11720000 (RO) 11740000 (RO)
11760000 (RO) 11780000 (RO) 117A0000 (RO) 117C0000 (RO) 117E0000 (RO)
11800000 (RO) 11820000 (RO) 11840000 (RO) 11860000 (RO) 11880000 (RO)
118A0000 (RO) 118C0000 (RO) 118E0000 (RO) 11900000 (RO) 11920000 (RO)
11940000 (RO) 11960000 (RO) 11980000 (RO) 119A0000 (RO) 119C0000 (RO)
119E0000 (RO) 11A00000 (RO) 11A20000 (RO) 11A40000 (RO) 11A60000 (RO)
11A80000 (RO) 11AA0000 (RO) 11AC0000 (RO) 11AE0000 (RO) 11B00000 (RO)
11B20000 (RO) 11B40000 (RO) 11B60000 (RO) 11B80000 (RO) 11BA0000 (RO)
11BC0000 (RO) 11BE0000 (RO) 11C00000 (RO) 11C20000 (RO) 11C40000 (RO)
11C60000 (RO) 11C80000 (RO) 11CA0000 (RO) 11CC0000 (RO) 11CE0000 (RO)
11D00000 (RO) 11D20000 (RO) 11D40000 (RO) 11D60000 (RO) 11D80000 (RO)
11DA0000 (RO) 11DC0000 (RO) 11DE0000 (RO) 11E00000 (RO) 11E20000 (RO)
11E40000 (RO) 11E60000 (RO) 11E80000 (RO) 11EA0000 (RO) 11EC0000 (RO)
11EE0000 (RO) 11F00000 (RO) 11F20000 (RO) 11F40000 (RO) 11F60000 (RO)
11F80000 (RO) 11FA0000 (RO) 11FC0000 (RO) 11FE0000 (RO)
scb9328>
Now it unlocks erases and programs the flash fine so far.
But what is this variable for?
flinfo gets the right capacity and number of sectors automatically.
Is it harmful the variable being too big? I have
CFG_MAX_FLASH_SECT set to 266 now, because I don't now the number of
sectors of p30 flash exactly...
Now jffs2 of 2.6.14 crashes in jffs2_scan_medium, but I have to check
this with the kernel guys...
Regards, Konsti
--
GPG KeyID EF62FCEF
Fingerprint: 13C9 B16B 9844 EC15 CC2E A080 1E69 3FDA EF62 FCEF
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2006-05-13 13:29 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-05-11 10:46 [U-Boot-Users] Intel P30, HowTo? Konstantin Kletschke
2006-05-11 16:22 ` Wolfgang Denk
2006-05-11 16:52 ` [U-Boot-Users] PCI pci_read_config_word k bisla
2006-05-12 5:38 ` Sam Song
2006-05-12 6:16 ` [U-Boot-Users] Intel P30, HowTo? Stefan Roese
2006-05-12 8:37 ` Konstantin Kletschke
2006-05-12 12:21 ` Wolfgang Denk
2006-05-12 14:50 ` Konstantin Kletschke
2006-05-13 13:29 ` Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2006-05-12 9:22 Konstantin Kletschke
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox