* [U-Boot-Users] IXP4XX NPE Support
[not found] <200606081048.52051.sr@denx.de>
@ 2006-06-08 16:40 ` Michael Sprauve
2006-06-08 16:48 ` Stefan Roese
0 siblings, 1 reply; 5+ messages in thread
From: Michael Sprauve @ 2006-06-08 16:40 UTC (permalink / raw)
To: u-boot
Hi Stefan,
Thanks for the file, the build works again, so now I
am moving to the next steps, it appears that the
software is not recognizing the NPE, so I would
imagine that there are some vars that need to be added
to the "include/configs/ixdp425.h" to make the port
available.
Mike
--- Stefan Roese <sr@denx.de> wrote:
> Hi Michael,
>
> On Wednesday 07 June 2006 16:25, Michael Sprauve
> wrote:
> > I noticed the one file missing (IxNpeMicrocode.c)
> but
> > was able to include my local copy in the build
> > (assuming that your version is same), but it seems
> > like the build is choking on the include file used
> by
> > npe.c.
>
> It seems that we broke the code in IxEthDB.h while
> trying to clean it
> from "//" style comments. With the attached
> (test-)version of this file the
> build should work again.
>
> Best regards,
> Stefan
> > /** @file IxEthDB.h
> *
> * @brief this file contains the public API of @ref
> IxEthDB component
> *
> *
> * @par
> * IXP400 SW Release version 2.0
> *
> * -- Copyright Notice --
> *
> * @par
> * Copyright 2001-2005, Intel Corporation.
> * All rights reserved.
> *
> * @par
> * Redistribution and use in source and binary
> forms, with or without
> * modification, are permitted provided that the
> following conditions
> * are met:
> * 1. Redistributions of source code must retain the
> above copyright
> * notice, this list of conditions and the
> following disclaimer.
> * 2. Redistributions in binary form must reproduce
> the above copyright
> * notice, this list of conditions and the
> following disclaimer in the
> * documentation and/or other materials provided
> with the distribution.
> * 3. Neither the name of the Intel Corporation nor
> the names of its contributors
> * may be used to endorse or promote products
> derived from this software
> * without specific prior written permission.
> *
> * @par
> * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
> HOLDERS AND CONTRIBUTORS ``AS IS''
> * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
> BUT NOT LIMITED TO, THE
> * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR A PARTICULAR PURPOSE
> * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> OWNER OR CONTRIBUTORS BE LIABLE
> * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
> EXEMPLARY, OR CONSEQUENTIAL
> * DAMAGES (INCLUDING, BUT NOT LIMITED TO,
> PROCUREMENT OF SUBSTITUTE GOODS
> * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
> BUSINESS INTERRUPTION)
> * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
> WHETHER IN CONTRACT, STRICT
> * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
> OTHERWISE) ARISING IN ANY WAY
> * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> OF THE POSSIBILITY OF
> * SUCH DAMAGE.
> *
> * @par
> * -- End of Copyright Notice --
> *
> */
>
> #ifndef IxEthDB_H
> #define IxEthDB_H
>
> #include <IxOsBuffMgt.h>
> #include <IxTypes.h>
>
> /**
> * @defgroup IxEthDB IXP400 Ethernet Database
> (IxEthDB) API
> *
> * @brief ethDB is a library that does provides a
> MAC address database learning/filtering capability
> *
> *@{
> */
>
> #define INLINE __inline__
>
> #define IX_ETH_DB_PRIVATE PRIVATE /* imported from
> IxTypes.h */
>
> #define IX_ETH_DB_PUBLIC PUBLIC
>
> /**
> * @brief port ID => message handler NPE id
> conversion (0 => NPE_B, 1 => NPE_C)
> */
> #define IX_ETH_DB_PORT_ID_TO_NPE(id) (id == 0 ? 1 :
> (id == 1 ? 2 : (id == 2 ? 0 : -1)))
>
> /**
> * @def IX_ETH_DB_NPE_TO_PORT_ID(npe)
> * @brief message handler NPE id => port ID
> conversion (NPE_B => 0, NPE_C => 1)
> */
> #define IX_ETH_DB_NPE_TO_PORT_ID(npe) (npe == 0 ? 2
> : (npe == 1 ? 0 : (npe == 2 ? 1 : -1)))
>
> /* temporary define - won't work for Azusa */
> #define IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(id)
> (IX_ETH_DB_PORT_ID_TO_NPE(id) << 4)
> #define IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(id)
> (IX_ETH_DB_NPE_TO_PORT_ID(id >> 4))
>
> /**
> * @def IX_IEEE803_MAC_ADDRESS_SIZE
> * @brief The size of the MAC address
> */
> #define IX_IEEE803_MAC_ADDRESS_SIZE (6)
>
> /**
> * @def IX_IEEE802_1Q_QOS_PRIORITY_COUNT
> * @brief Number of QoS priorities defined by
> IEEE802.1Q
> */
> #define IX_IEEE802_1Q_QOS_PRIORITY_COUNT (8)
>
> /**
> * @enum IxEthDBStatus
> * @brief Ethernet Database API return values
> */
> typedef enum /* IxEthDBStatus */
> {
> IX_ETH_DB_SUCCESS = IX_SUCCESS, /**< Success */
> IX_ETH_DB_FAIL = IX_FAIL, /**< Failure */
> IX_ETH_DB_INVALID_PORT, /**< Invalid
> port */
> IX_ETH_DB_PORT_UNINITIALIZED, /**< Port not
> initialized */
> IX_ETH_DB_MAC_UNINITIALIZED, /**< MAC not
> initialized */
> IX_ETH_DB_INVALID_ARG, /**< Invalid
> argument */
> IX_ETH_DB_NO_SUCH_ADDR, /**< Address not
> found for search or delete operations */
> IX_ETH_DB_NOMEM, /**< Learning
> database memory full */
> IX_ETH_DB_BUSY, /**< Learning
> database cannot complete operation, access
> temporarily blocked */
> IX_ETH_DB_END, /**< Database
> browser passed the end of the record set */
> IX_ETH_DB_INVALID_VLAN, /**< Invalid
> VLAN ID (valid range is 0..4094, 0 signifies no VLAN
> membership, used for priority tagged frames) */
> IX_ETH_DB_INVALID_PRIORITY, /**< Invalid QoS
> priority/traffic class (valid range for QoS priority
> is 0..7, valid range for traffic class depends on
> run-time configuration) */
> IX_ETH_DB_NO_PERMISSION, /**< No
> permission for attempted operation */
> IX_ETH_DB_FEATURE_UNAVAILABLE, /**< Feature not
> available (or not enabled) */
> IX_ETH_DB_INVALID_KEY, /**< Invalid
> search key */
> IX_ETH_DB_INVALID_RECORD_TYPE /**< Invalid
> record type */
> } IxEthDBStatus;
>
> /** @brief VLAN ID type, valid range is 0..4094, 0
> signifying no VLAN membership */
> typedef UINT32 IxEthDBVlanId;
>
> /** @brief 802.1Q VLAN tag, contains 3 bits user
> priority, 1 bit CFI, 12 bits VLAN ID */
> typedef UINT32 IxEthDBVlanTag;
>
> /** @brief QoS priority/traffic class type, valid
> range is 0..7, 0 being the lowest */
> typedef UINT32 IxEthDBPriority;
>
> /** @brief Priority mapping table; 0..7 QoS
> priorities used to index, table contains traffic
> classes */
> typedef UINT8 IxEthDBPriorityTable[8];
>
> /** @brief A 4096 bit array used to map the complete
> VLAN ID range */
> typedef UINT8 IxEthDBVlanSet[512];
>
> #define IX_ETH_DB_802_1Q_VLAN_MASK (0xFFF)
> #define IX_ETH_DB_802_1Q_QOS_MASK (0x7)
>
> #define IX_ETH_DB_802_1Q_MAX_VLAN_ID (0xFFE)
>
> /**
> * @def IX_ETH_DB_SET_VLAN_ID
> * @brief returns the given 802.1Q tag with the VLAN
> ID field substituted with the given VLAN ID
> *
> * This macro is used to change the VLAN ID in a
> 802.1Q tag.
> *
> * Example:
> *
> * tag = IX_ETH_DB_SET_VLAN_ID(tag, 32)
>
=== message truncated ===
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
^ permalink raw reply [flat|nested] 5+ messages in thread