* [U-Boot-Users] PPC440 and CONFIG_BOOKE
@ 2006-09-24 16:34 Jeff Mock
2006-09-25 5:46 ` Stefan Roese
0 siblings, 1 reply; 2+ messages in thread
From: Jeff Mock @ 2006-09-24 16:34 UTC (permalink / raw)
To: u-boot
I'm porting u-boot to a new piece of hardware using a 440GX processor.
My hardware looks a little bit like an Ocotea board so I'm using this as
my starting point.
The Ocotea configuration (and the other PPC4xx boards) doesn't define
CONFIG_BOOKE in the config file. The 440GX is a Book-E processor, this
appears to define some of the SPRNs incorrectly.
Is this done intentionally?
thanks,
jeff
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot-Users] PPC440 and CONFIG_BOOKE
2006-09-24 16:34 [U-Boot-Users] PPC440 and CONFIG_BOOKE Jeff Mock
@ 2006-09-25 5:46 ` Stefan Roese
0 siblings, 0 replies; 2+ messages in thread
From: Stefan Roese @ 2006-09-25 5:46 UTC (permalink / raw)
To: u-boot
Hi Jeff,
On Sunday 24 September 2006 18:34, Jeff Mock wrote:
> I'm porting u-boot to a new piece of hardware using a 440GX processor.
> My hardware looks a little bit like an Ocotea board so I'm using this as
> my starting point.
OK.
> The Ocotea configuration (and the other PPC4xx boards) doesn't define
> CONFIG_BOOKE in the config file. The 440GX is a Book-E processor, this
> appears to define some of the SPRNs incorrectly.
>
> Is this done intentionally?
The first 440 U-Boot ports (including Ocotea) where done, long before the
CONFIG_BOOKE define was added to U-Boot. All needed SPRN's should be defined
in include/ppc440.h.
Please let me know, if you spot a problem with any PPC4xx register
definitions.
Best regards,
Stefan
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-09-25 5:46 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-09-24 16:34 [U-Boot-Users] PPC440 and CONFIG_BOOKE Jeff Mock
2006-09-25 5:46 ` Stefan Roese
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox