* [U-Boot-Users] the Consel on SCC 1 for 8260
@ 2006-11-06 2:00 handson
0 siblings, 0 replies; only message in thread
From: handson @ 2006-11-06 2:00 UTC (permalink / raw)
To: u-boot
I have changed the MPC8260ads for my own board. now, my uboot is come up, but the serial port didn't print anything.
I have set the boud rate, the IO port for SCC 1. And I am sure the hardware has no problem.
Is there anything left unchanged that I should change?
best regards.
handson
2006-11-06
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061106/e82d107c/attachment.htm
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-11-06 2:00 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-11-06 2:00 [U-Boot-Users] the Consel on SCC 1 for 8260 handson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox