[U-Boot-Users] Set of patches for FDT support

[U-Boot-Users] Set of patches for FDT support

[Grant Likely]

[RESEND] My first email didn't get sent to the list

Matt, Jon, Kumar,

Here are some changes for u-boot fdt support.  Please take a look and make
sure I've taken the right approach.  Once you guys are happy I'll ask
Wolfgang to pull them into his tree

Thanks,
g.

[U-Boot-Users] Set of patches for FDT support

[Grant Likely]

GIT: Please enter your email below.
GIT: Lines beginning in "GIT: " will be removed.
GIT: Consider including an overall diffstat or table of contents
GIT: for the patch you are writing.

[RESEND] My first email didn't get sent to the list

Matt, Jon, Kumar,

Here are some changes for u-boot fdt support.  Please take a look and make
sure I've taken the right approach.  Once you guys are happy I'll ask
Wolfgang to pull them into his tree

Thanks,
g.

[U-Boot-Users] Set of patches for FDT support

[Grant Likely]

[RESEND] My first email didn't get sent to the list

Matt, Jon, Kumar,

Here are some changes for u-boot fdt support.  Please take a look and make
sure I've taken the right approach.  Once you guys are happy I'll ask
Wolfgang to pull them into his tree

Thanks,
g.

[U-Boot-Users] [PATCH] Add 'ftinfo' command for displaying a flattened device tree image

[Grant Likely]

Note: I've added this command to ft_build.c instead of a seperate cmd_*.c
because it is such a small amount of code.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 common/ft_build.c |   23 +++++++++++++++++++++++
 1 files changed, 23 insertions(+), 0 deletions(-)

diff --git a/common/ft_build.c b/common/ft_build.c
index 980e40f..9a36187 100644
--- a/common/ft_build.c
+++ b/common/ft_build.c
@@ -20,6 +20,7 @@
  */
 
 #include <common.h>
+#include <command.h>
 #include <malloc.h>
 #include <environment.h>
 
@@ -588,4 +589,26 @@ #ifdef DEBUG
 	ft_dump_blob(blob);
 #endif
 }
+
+int do_ftinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	void* addr;
+	if (argc < 2) {
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	addr = (void*)simple_strtoul(argv[1], NULL, 16);
+	printf("Printing device tree at 0x%x\n", addr);
+	ft_dump_blob(addr);
+	return 0;
+}
+
+/* -------------------------------------------------------------------- */
+
+U_BOOT_CMD(
+	ftinfo, 2, 2, do_ftinfo, "ftinfo - print a flattened device tree\n",
+	"ftinfo addr\n"
+	"    - print device tree at address 'addr'\n"
+);
 #endif
-- 
1.4.3.rc2.g0503

[U-Boot-Users] [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel

[Grant Likely]

This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
arguments to bootm.  It removes the getenv("disable_of") test that used
to be used for this purpose.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 common/cmd_bootm.c |   54 +++++++++++++++++++++------------------------------
 1 files changed, 22 insertions(+), 32 deletions(-)

diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 3091a58..7aae8a6 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -833,10 +833,6 @@ #endif
 			printf ("ERROR: flat device tree size does not agree with image\n");
 			return;
 		}
-
-	} else if (getenv("disable_of") == NULL) {
-		printf ("ERROR: bootm needs flat device tree as third argument\n");
-		return;
 	}
 #endif
 	if (!data) {
@@ -913,23 +909,11 @@ #endif	/* CONFIG_HW_WATCHDOG || CONFIG_W
 
 	SHOW_BOOT_PROGRESS (15);
 
-#ifndef CONFIG_OF_FLAT_TREE
-
 #if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500)
 	unlock_ram_in_cache();
 #endif
 
-	/*
-	 * Linux Kernel Parameters:
-	 *   r3: ptr to board info data
-	 *   r4: initrd_start or 0 if no initrd
-	 *   r5: initrd_end - unused if r4 is 0
-	 *   r6: Start of command line string
-	 *   r7: End   of command line string
-	 */
-	(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
-
-#else	/* CONFIG_OF_FLAT_TREE */
+#ifdef CONFIG_OF_FLAT_TREE
 	/* move of_flat_tree if needed */
 	if (of_data) {
 		ulong of_start, of_len;
@@ -948,30 +932,36 @@ #else	/* CONFIG_OF_FLAT_TREE */
 			of_start, of_start + of_len - 1);
 		memmove ((void *)of_start, (void *)of_data, of_len);
 	}
+#endif
 
-	ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
-	/* ft_dump_blob(of_flat_tree); */
-
-#if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500)
-	unlock_ram_in_cache();
+	/*
+	 * Linux Kernel Parameters (passing board info data):
+	 *   r3: ptr to board info data
+	 *   r4: initrd_start or 0 if no initrd
+	 *   r5: initrd_end - unused if r4 is 0
+	 *   r6: Start of command line string
+	 *   r7: End   of command line string
+	 */
+#ifdef CONFIG_OF_FLAT_TREE
+	if (!of_flat_tree)	/* no device tree; boot old style */
 #endif
+		(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
+		/* does not return */
+
+#ifdef CONFIG_OF_FLAT_TREE
 	/*
-	 * Linux Kernel Parameters:
+	 * Linux Kernel Parameters (passing device tree):
 	 *   r3: ptr to OF flat tree, followed by the board info data
 	 *   r4: physical pointer to the kernel itself
 	 *   r5: NULL
 	 *   r6: NULL
 	 *   r7: NULL
 	 */
-	if (getenv("disable_of") != NULL)
-		(*kernel) ((bd_t *)of_flat_tree, initrd_start, initrd_end,
-			cmd_start, cmd_end);
-	else {
-		ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
-		/* ft_dump_blob(of_flat_tree); */
-		(*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0);
-	}
-#endif	/* CONFIG_OF_FLAT_TREE */
+	ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
+	/* ft_dump_blob(of_flat_tree); */
+
+	(*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0);
+#endif
 }
 #endif /* CONFIG_PPC */
 
-- 
1.4.3.rc2.g0503

[U-Boot-Users] [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.

[Grant Likely]

This patch adds the code and configuration necessary to boot with an
arch/powerpc Linux kernel.

Signed-off-by: Grant Likely <grant.likely@gmail.com>
---
 board/icecube/icecube.c   |   12 ++++++++++++
 cpu/mpc5xxx/cpu.c         |   28 ++++++++++++++++++++++++++++
 include/configs/IceCube.h |   13 +++++++++++++
 3 files changed, 53 insertions(+), 0 deletions(-)

diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index 4f056b2..9b222da 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -29,6 +29,10 @@ #include <mpc5xxx.h>
 #include <pci.h>
 #include <asm/processor.h>
 
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
 #if defined(CONFIG_LITE5200B)
 #include "mt46v32m16.h"
 #else
@@ -334,3 +338,11 @@ void ide_set_reset (int idereset)
 	}
 }
 #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+}
+#endif
diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index 6b6f828..20e6735 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -31,6 +31,10 @@ #include <command.h>
 #include <mpc5xxx.h>
 #include <asm/processor.h>
 
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 int checkcpu (void)
@@ -102,3 +106,27 @@ unsigned long get_tbclk (void)
 }
 
 /* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_cpu_setup(void *blob, bd_t *bd)
+{
+	u32 *p;
+	ulong clock;
+	int len;
+
+	clock = bd->bi_busfreq;
+	p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
+	if (p != NULL)
+		*p = cpu_to_be32(clock);
+
+	p = ft_get_prop(blob, "/" OF_SOC "/bus-frequency", &len);
+	if (p != NULL)
+		*p = cpu_to_be32(clock);
+
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet at 3000/mac-address", &len);
+	if (p != NULL)
+		memcpy(p, bd->bi_enetaddr, 6);
+
+}
+#endif
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 1152f83..0d38254 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -172,6 +172,19 @@ #else
 #undef CFG_IPBSPEED_133   	/* define for 133MHz speed */
 #endif
 #endif /* CONFIG_MPC5200 */
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,5200 at 0"
+#define OF_SOC			"soc5200 at f0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH		"/soc5200 at f0000000/serial at 2000"
+
 /*
  * I2C configuration
  */
-- 
1.4.3.rc2.g0503

[U-Boot-Users] [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel

[Wolfgang Denk]

Dear Grant,

in message <1162162451757-git-send-email-grant.likely@secretlab.ca> you wrote:
> 
...
> -	ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
> -	/* ft_dump_blob(of_flat_tree); */
> -
> -#if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500)
> -	unlock_ram_in_cache();

Are you sure you want to remove this unlock_ram_in_cache() ?

Why?

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Real programmers can write assembly code in any language.   :-)
                      - Larry Wall in  <8571@jpl-devvax.JPL.NASA.GOV>

[U-Boot-Users] [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.

[Wolfgang Denk]

In message <11621624513123-git-send-email-grant.likely@secretlab.ca> you wrote:
> This patch adds the code and configuration necessary to boot with an
> arch/powerpc Linux kernel.
...
> --- a/board/icecube/icecube.c
> +++ b/board/icecube/icecube.c
...
> @@ -334,3 +338,11 @@ void ide_set_reset (int idereset)
>  	}
>  }
>  #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
> +
> +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
> +void
> +ft_board_setup(void *blob, bd_t *bd)
> +{
> +	ft_cpu_setup(blob, bd);
> +}
> +#endif

How much of this is really board dependent? How likely  is  it,  then
all other 5200 boards will just copy & paste these few lines of code?
Maybe we can make this common code, and just allow for board-specific
overwrites when really needed?

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The bad reputation UNIX has gotten is totally undeserved, laid on by
people who don't understand, who have not gotten in there  and  tried
anything."          -- Jim Joyce, owner of Jim Joyce's UNIX Bookstore

[U-Boot-Users] [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel

[Grant Likely]

On 10/29/06, Wolfgang Denk <wd@denx.de> wrote:
> Dear Grant,
>
> in message <1162162451757-git-send-email-grant.likely@secretlab.ca> you wrote:
> >
> ...
> > -     ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
> > -     /* ft_dump_blob(of_flat_tree); */
> > -
> > -#if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500)
> > -     unlock_ram_in_cache();
>
> Are you sure you want to remove this unlock_ram_in_cache() ?
>
> Why?

It's not actually removed.  Rather it's no longer duplicated in two
halves of a #if/#else/#endif block.

g.
>
> Best regards,
>
> Wolfgang Denk
>
> --
> Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> Real programmers can write assembly code in any language.   :-)
>                       - Larry Wall in  <8571@jpl-devvax.JPL.NASA.GOV>
>


-- 
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
grant.likely at secretlab.ca
(403) 399-0195

[U-Boot-Users] [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.

[Grant Likely]

On 10/29/06, Wolfgang Denk <wd@denx.de> wrote:
> In message <11621624513123-git-send-email-grant.likely@secretlab.ca> you wrote:
> > This patch adds the code and configuration necessary to boot with an
> > arch/powerpc Linux kernel.
> ...
> > --- a/board/icecube/icecube.c
> > +++ b/board/icecube/icecube.c
> ...
> > @@ -334,3 +338,11 @@ void ide_set_reset (int idereset)
> >       }
> >  }
> >  #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
> > +
> > +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
> > +void
> > +ft_board_setup(void *blob, bd_t *bd)
> > +{
> > +     ft_cpu_setup(blob, bd);
> > +}
> > +#endif
>
> How much of this is really board dependent? How likely  is  it,  then
> all other 5200 boards will just copy & paste these few lines of code?
> Maybe we can make this common code, and just allow for board-specific
> overwrites when really needed?

Oh, probably.  :)

In this case I was following the convention already established w/ the
other boards.  I can take another look and see about making a
recommendation for cleaning up this construct.

Cheers,
g.

>
> Best regards,
>
> Wolfgang Denk
>
> --
> Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> "The bad reputation UNIX has gotten is totally undeserved, laid on by
> people who don't understand, who have not gotten in there  and  tried
> anything."          -- Jim Joyce, owner of Jim Joyce's UNIX Bookstore
>


-- 
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
grant.likely at secretlab.ca
(403) 399-0195

[U-Boot-Users] [PATCH] Add 'ftinfo' command for displaying a flattened device tree image

[Matthew McClintock]

On Sun, 2006-10-29 at 15:54 -0700, Grant Likely wrote:
> Note: I've added this command to ft_build.c instead of a seperate cmd_*.c
> because it is such a small amount of code.
> 
> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

Jerry Van Barren has a similar, yet slightly more robust "of" command
implementation floating around that might be worth looking into.

http://www.cideas.us/cgi-bin/gitweb.cgi?p=u-boot/u-boot-pq2fads.git;a=summary

-Matthew

[U-Boot-Users] [PATCH] Add 'ftinfo' command for displaying a flattened device tree image

[Grant Likely]

On 10/30/06, Matthew McClintock <msm@freescale.com> wrote:
> On Sun, 2006-10-29 at 15:54 -0700, Grant Likely wrote:
> > Note: I've added this command to ft_build.c instead of a seperate cmd_*.c
> > because it is such a small amount of code.
> >
> > Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
>
> Jerry Van Barren has a similar, yet slightly more robust "of" command
> implementation floating around that might be worth looking into.

Yeah, I saw that today.  The ability to dump a subset of the tree looks useful

g.

-- 
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
grant.likely at secretlab.ca
(403) 399-0195

[U-Boot-Users] [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.

[Grant Likely]

On 10/29/06, Grant Likely <grant.likely@secretlab.ca> wrote:
> On 10/29/06, Wolfgang Denk <wd@denx.de> wrote:
> > In message <11621624513123-git-send-email-grant.likely@secretlab.ca> you wrote:
> > > This patch adds the code and configuration necessary to boot with an
> > > arch/powerpc Linux kernel.
> > ...
> > > --- a/board/icecube/icecube.c
> > > +++ b/board/icecube/icecube.c
> > ...
> > > @@ -334,3 +338,11 @@ void ide_set_reset (int idereset)
> > >       }
> > >  }
> > >  #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
> > > +
> > > +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
> > > +void
> > > +ft_board_setup(void *blob, bd_t *bd)
> > > +{
> > > +     ft_cpu_setup(blob, bd);
> > > +}
> > > +#endif
> >
> > How much of this is really board dependent? How likely  is  it,  then
> > all other 5200 boards will just copy & paste these few lines of code?
> > Maybe we can make this common code, and just allow for board-specific
> > overwrites when really needed?
>
> Oh, probably.  :)
>
> In this case I was following the convention already established w/ the
> other boards.  I can take another look and see about making a
> recommendation for cleaning up this construct.

Wolfgang,

I'd like to defer this change to another patch.  This convention is
used by all boards that support OF booting, so it should all be
changed at once.  Plus there is still discussion about what the
correct layout should be between ft_setup, ft_cpu_setup and
ft_board_setup calls.

Is that okay by you?

Cheers,
g.

-- 
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
grant.likely at secretlab.ca
(403) 399-0195

[U-Boot-Users] [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel

[Jon Loeliger]

    This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
    arguments to bootm.  It removes the getenv("disable_of") test that used
    to be used for this purpose.

    Signed-off-by: Grant Likely <grant.likely <at> secretlab.ca>
    ---

Acked-by: Jon Loeliger <jdl@freescale.com>

[U-Boot-Users] [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.

[Jon Loeliger]

On Sun, 2006-10-29 at 16:54, Grant Likely wrote:
> This patch adds the code and configuration necessary to boot with an
> arch/powerpc Linux kernel.
> 
> Signed-off-by: Grant Likely <grant.likely@gmail.com>
> ---


Acked-by: Jon Loeliger <jdl@freescale.com>

[U-Boot-Users] [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel

[Stefan Roese]

On Sunday 29 October 2006 23:54, Grant Likely wrote:
> This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
> arguments to bootm.  It removes the getenv("disable_of") test that used
> to be used for this purpose.

Applied. Thanks.

Best regards,
Stefan

[U-Boot-Users] [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel

[Grant Likely]

On 11/28/06, Stefan Roese <sr@denx.de> wrote:
> On Sunday 29 October 2006 23:54, Grant Likely wrote:
> > This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
> > arguments to bootm.  It removes the getenv("disable_of") test that used
> > to be used for this purpose.
>
> Applied. Thanks.

Brilliant, thank you.  Are you able to apply the lite5200 fdt support
patch also (it was sent at the same time)?

http://news.gmane.org/find-root.php?message_id=%3c11621624513123%2dgit%2dsend%2demail%2dgrant.likely%40secretlab.ca%3e

Thanks,
g.

-- 
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
grant.likely at secretlab.ca
(403) 399-0195

[U-Boot-Users] [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel

[Jon Loeliger]

On Tue, 2006-11-28 at 08:37, Grant Likely wrote:
> On 11/28/06, Stefan Roese <sr@denx.de> wrote:
> >
> > Applied. Thanks.
> 
> Brilliant, thank you.

Indeed, thanks, Stefan.

>   Are you able to apply the lite5200 fdt support
> patch also (it was sent at the same time)?
> 
> http://news.gmane.org/find-root.php?message_id=%3c11621624513123%2dgit%2dsend%2demail%2dgrant.likely%40secretlab.ca%3e

And that would be the other patch I also ACK-ed.

jdl

[U-Boot-Users] [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel

[Stefan Roese]

On Tuesday 28 November 2006 17:13, Jon Loeliger wrote:
> On Tue, 2006-11-28 at 08:37, Grant Likely wrote:
> > On 11/28/06, Stefan Roese <sr@denx.de> wrote:
> > > Applied. Thanks.
> >
> > Brilliant, thank you.
>
> Indeed, thanks, Stefan.

You're welcome. :-)

> >   Are you able to apply the lite5200 fdt support
> > patch also (it was sent at the same time)?
> >
> > http://news.gmane.org/find-root.php?message_id=%3c11621624513123%2dgit%2d
> >send%2demail%2dgrant.likely%40secretlab.ca%3e
>
> And that would be the other patch I also ACK-ed.

Hold your horses. Will do my best... ;-)

Best regards,
Stefan

[U-Boot-Users] [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.

[Stefan Roese]

On Sunday 29 October 2006 23:54, Grant Likely wrote:
> This patch adds the code and configuration necessary to boot with an
> arch/powerpc Linux kernel.

Applied. Thanks.

Best regards,
Stefan

[U-Boot-Users] [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.

[Grant Likely]

On 11/29/06, Stefan Roese <sr@denx.de> wrote:
> On Sunday 29 October 2006 23:54, Grant Likely wrote:
> > This patch adds the code and configuration necessary to boot with an
> > arch/powerpc Linux kernel.
>
> Applied. Thanks.

Cool, thanks!

g.


-- 
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
grant.likely at secretlab.ca
(403) 399-0195