From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matthias Fuchs Date: Thu, 4 Jan 2007 18:45:26 +0100 Subject: [U-Boot-Users] reg ISP 1561 integration with u-boot1.1.6 In-Reply-To: <4ac2955e0701040358u5699f021o163696f8cf70ba4a@mail.gmail.com> References: <4ac2955e0701040358u5699f021o163696f8cf70ba4a@mail.gmail.com> Message-ID: <200701041845.26424.matthias.fuchs@esd-electronics.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, PCI OHCI controllers are currently not supported by U-Boot. Only some on-chip host controllers are currently supported - even though they are OHCI compatible PCI OHCI is not that easy because of the endianess. I also need to get an OHCI controller working from U-Boot to access a mass storage device. It's also the ISP1561 :-) I started to work on a the testing-USB branch but it's not working yet. Matthias On Thursday 04 January 2007 12:58, mahendra varman wrote: > Hi, > > Iam Using Philips PCI based ISP 1561 OHCI usb controller in a PPC7410 > processor board. > > For integrating the ISP 1561 into U-boot 1.1.6 wht config commands i have > to add... (I need to make cmd_usb.c in u boot 1.1.6 working for my device ) > ? > > Please Guide me.. > > Thanks and regards > R.Mahendran > -- ----------------------------------------------------------------------- Dipl.-Ing. Matthias Fuchs esd electronic system design gmbh http://www.esd-electronics.com Vahrenwalder Str. 207 phone: +49-511-37298-0, fax: -68 30165 Hannover, Germany -----------------------------------------------------------------------