From mboxrd@z Thu Jan 1 00:00:00 1970 From: kontakt at download-privat.de Date: Wed, 17 Jan 2007 08:31:32 +0100 Subject: [U-Boot-Users] U-Boot-1.1.4 using STUART In-Reply-To: References: Message-ID: <20070117073132.111090@gmx.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Charles, I think the same as you about my problem.Is this problem only on my PXA-based board schematic or is it a PXA problem? Thank you for your request! > Dear Kontakt: > > If I recall, there is something slightly unusual about the > STUART compared with the FFUART in the PXA. You might look carefully at > the hardware differences in the PXA pdf file from Intel and see if you > can discern that difference. > > Charles > >> Hi all, >> >> my System is a PXA based board. First i used the FFUart Port for >> bootmessages from bootloader and i can then display the >> kernelbootmessages on FFUART und STUART. >> But if i use STUART for Bootloader bootmessages then my Kernel is not >> starting. >> >> What is the problem with the STUART? >> >> Thank you for you help! -- Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer