[U-Boot-Users] U-Boot-1.1.4 using STUART

[U-Boot-Users] U-Boot-1.1.4 using STUART

[Charles Krinke]

Dear Kontakt:

If I recall, there is something slightly unusual about the STUART compared with the FFUART in the PXA. You might look carefully at the hardware differences in the PXA pdf file from Intel and see if you can discern that difference.

Charles

-----Original Message-----
From: u-boot-users-bounces@lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of kontakt at download-privat.de
Sent: Monday, January 15, 2007 2:30 AM
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] U-Boot-1.1.4 using STUART

Hi all,

my System is a PXA based board. First i used the FFUart Port for bootmessages from bootloader and i can then display the kernelbootmessages on FFUART und STUART. 
But if i use STUART for Bootloader bootmessages then my Kernel is not starting.

What is the problem with the STUART?

Thank you for you help!
-- 
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

[U-Boot-Users] U-Boot-1.1.4 using STUART

[kontakt at download-privat.de]

Hi Charles,

I think the same as you about my problem.Is this problem only on my PXA-based board schematic or is it a PXA problem?

Thank you for your request!


> Dear Kontakt:
> 
> If I recall, there is something slightly unusual about the 
> STUART compared with the FFUART in the PXA. You might look carefully at 
> the hardware differences in the PXA pdf file from Intel and see if you 
> can discern that difference.
> 
> Charles
> 
>> Hi all,
>> 
>> my System is a PXA based board. First i used the FFUart Port for
>> bootmessages from bootloader and i can then display the 
>> kernelbootmessages on FFUART und STUART. 
>> But if i use STUART for Bootloader bootmessages then my Kernel is not
>> starting.
>> 
>> What is the problem with the STUART?
>> 
>> Thank you for you help!

-- 
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer

[U-Boot-Users] U-Boot-1.1.4 using STUART

[kontakt at download-privat.de]

Hi all,

my System is a PXA based board. First i used the FFUart Port for bootmessages from bootloader and i can then display the kernelbootmessages on FFUART und STUART. 
But if i use STUART for Bootloader bootmessages then my Kernel is not starting.

What is the problem with the STUART?

Thank you for you help!
-- 
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer

[U-Boot-Users] U-Boot-1.1.4 using STUART

[kontakt at download-privat.de]

Hi all,

my System is a PXA based board. First i used the FFUart Port for bootmessages from bootloader and i can then display the kernelbootmessages on FFUART und STUART. 
But if i use STUART for Bootloader bootmessages then my Kernel is not starting.

What is the problem with the STUART?

Thank you for you help!




-- 
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer