From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] yet another hang after relocate
Date: Tue, 23 Jan 2007 01:08:29 +0100 [thread overview]
Message-ID: <20070123000829.23940353CDC@atlas.denx.de> (raw)
In-Reply-To: Your message of "Mon, 22 Jan 2007 15:54:39 PST." <802881.16758.qm@web32906.mail.mud.yahoo.com>
In message <802881.16758.qm@web32906.mail.mud.yahoo.com> you wrote:
>
> Im using U-Boot 1.1.5 compiled with gcc 2.4.6 and make
> 3.80.
Why don't you use current U-Boot code your new development?
And what the heck is GCC 2.4.6???
> and others are in the new 405GPr mode. They all boot
> and run vxworks just fine, though Im not sure if that
> runs from ram or not.
See the FAQ.
> The sdram setup for the 405 is extremely simple, just
> a few registers and delays. It is identical to all
You still have to get it right.
> Ive added a simple mem test with and without the data
> cache, which works fine either way. Also I copy the
> entire 2MB flash to ram and then verify it back.
> Again, no problems.
See the FAQ why this doesn't mean anything.
> TEXT_BASE: fffc0000
> CFG_MONITOR_BASE: ffe00000
Really? CFG_MONITOR_BASE != TEXT_BASE ? Are you sure about this?
> CFG_ENV_ADDR: ffe3f7f0
> CFG_ENV_OFFSET: 3f7f0
Really? Not aligned to a sector boundary? Are you sure about this?
> Top of RAM usable for U-Boot at: 01000000
> Reserving 1935k for U-Boot at: 00e1c000
Really? Your U-Boot image needs nearly 2 MB ? Are you sure about this?
> I use a gpio controlled LED to pin point the crash,
> and it is just as it tries to jump to ram.
...as expected for a FAQ #1 entry question.
> I have a feeling the sdram is fine, and either
Your feeling may be wrong. And your U-Boot is misconfigured, too.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If a packet hits a pocket on a socket on a port,
And the bus is interrupted as a very last resort,
And the address of the memory makes your floppy disk abort,
Then the socket packet pocket has an error to report! - Ken Burchill?
next prev parent reply other threads:[~2007-01-23 0:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-22 23:54 [U-Boot-Users] yet another hang after relocate Scott Hammond
2007-01-23 0:08 ` Wolfgang Denk [this message]
2007-01-23 0:35 ` Scott Hammond
2007-01-23 0:55 ` Scott Hammond
2007-01-23 16:18 ` Timur Tabi
2007-01-23 16:53 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070123000829.23940353CDC@atlas.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox