[U-Boot-Users] AT91 NAND om AT91SAM9260EK

[Stefan Roese <sr@denx.de>]

On Saturday 10 February 2007 02:15, Wolfgang Denk wrote:
> > I think a good place for any driver stuff which is useable
> > both by at91 and ap7xxx chips could be an
> > board/atmel/drivers directory.
>
> No. Not board/... if you are talking about chip specific features.
>
> > An alternative would be a cpu/atmel/drivers directory.
>
> or cpu/atmel/ (without the /drivers  part),  like  we  do  for  other
> processors.

I really prefer to "collect" the drivers in the "drivers" directory (or a 
subdirectory). We already do this (Freescale Quicc Engine "drivers/qe"), and 
we have something like "drivers/netarm_eth.c".

So especially for driver that can be used by more than one cpu platform, I 
suggest to put them into the drivers directory (or subdirectory) and _not_ 
create another directory instead.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office:  Kirchenstr. 5,       D-82194 Groebenzell,            Germany
=====================================================================