From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Thu, 3 May 2007 07:21:00 +0200
Subject: [U-Boot-Users] Getting Started Porting U-Boot to M5329EVB board
In-Reply-To: <4638BF7F.5010507@alum.mit.edu>
References: <4638BF7F.5010507@alum.mit.edu>
Message-ID: <200705030721.00820.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Bob,

On Wednesday 02 May 2007 18:42, Robert S. Grimes wrote:
> I'm getting started porting U-Boot to the Freescale/LogicPD M5329EVB
> board, based on the ColdFire MCF5329 processor.  As suggested in the
> "U-Boot Porting Guide" in the README file, I've subscribed to this list,
> and I'm admitting I am (currently) clueless - hence this email!
>
> At this point, my only real question is this - has anybody done this
> already?

I have not head of a MCF5329 U-Boot port. You are aware that the MCF52x2 
CondFires are supported? So this should be your starting point. Grep 
for "MCF52" in include/configs/* and you will see what boards are available 
with this CPU's.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office:  Kirchenstr. 5,       D-82194 Groebenzell,            Germany
=====================================================================