From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Wed, 9 May 2007 07:40:24 +0200
Subject: [U-Boot-Users] [PATCH] One more patch for the sequoia --- This
	time to get a fater EBC on newer 666.66 MHz processors
In-Reply-To: <1628E43D99629C46988BE46087A3FBB997B646@ep-01.EmbeddedPlanet.local>
References: <1628E43D99629C46988BE46087A3FBB997B646@ep-01.EmbeddedPlanet.local>
Message-ID: <200705090740.24487.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Jeff,

On Tuesday 08 May 2007, Jeff Mann wrote:
> [PATCH] Because the Sequoia board does not boot with an EBC faster than
> 66MHz,
> the clock divider are changed after the initial boot process.
>
> This allows for maximum clocking speeds  to be achieved on newer boards.
> Sequoia boards with 666.66 MHz processors require that the EBC divider
> be set
> to 3 in order to start the initial boot process at a slower EBC speed.
> After
> the initial boot process, the divider can be set back to 2, which will
> cause the
> boards to run at 83.333MHz. This is backward compatible with boards with
>
> 533.33 MHz processors, as these boards will already be set with an EBC
> divider
> of 2.
>
> Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
> ---
> Stefan: how's my formating this time?

Additional to Wolfgang's comments:

- Your mailer has wrapped the commit text above. Please you shorter
  lines next time
- The subject line is still way too long. Please try to find a short
  one line subject for the patch like:
  "[PATCH] ppc4xx: Fix Sequoia EBC configuration for new board revision"

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office:  Kirchenstr. 5,       D-82194 Groebenzell,            Germany
=====================================================================