From mboxrd@z Thu Jan  1 00:00:00 1970
From: Rodolfo Giometti <giometti@enneenne.com>
Date: Sun, 13 May 2007 01:19:07 +0200
Subject: [U-Boot-Users] PXA27x usbtty start up sequence
Message-ID: <20070512231906.GG11070@enneenne.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello,

I'm still playing with the PXA27x USB device support...

Using serial console with a bootdelay of only 1 second is ok, but
using usbtty is not. In fact is not possible to stop boot sequence
anymore unless bootdelay is increased at least 10-15 seconds needed to
run the terminal on the new ttyUSB0 device and to enter the password.

Is someone using usbtty during the boot sequence?

Also I notice that when usbtty is selected as the default console the
system doesn't start up until I connect the kermit/minicom to the new
ttyUSB0 device.

Is someone getting the same behaviour?

Thanks,

Rodolfo

-- 

GNU/Linux Solutions                  e-mail:    giometti at enneenne.com
Linux Device Driver                             giometti at gnudd.com
Embedded Systems                     		giometti at linux.it
UNIX programming                     phone:     +39 349 2432127