From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Wed, 30 May 2007 22:18:33 +0200 Subject: [U-Boot-Users] how can i change the amount of flash memory? In-Reply-To: <7ee1596c0705301250p6e7bd021p27ca4036a35ff6f5@mail.gmail.com> References: <7ee1596c0705301250p6e7bd021p27ca4036a35ff6f5@mail.gmail.com> Message-ID: <200705302218.34107.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wednesday 30 May 2007, sapirf fersht wrote: > I need to program a new board for a customer which is based on ixdp-425. I > need to change the flash memory from 256mb to 128mb. How can i do it? > I am new to this, so please try to help me. Since the ixdp425 U-Boot port already uses the common CFI flash driver, no changes should be needed. *If* the customer board really is identical to the Intel IXDP425 board except for the flash size. Did you give the ixdp425 image a try on the other board? Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================