[U-Boot-Users] how can i change the amount of flash memory?

[U-Boot-Users] how can i change the amount of flash memory?

[sapirf fersht]

I need to program a new board for a customer which is based on ixdp-425. I
need to change the flash memory from 256mb to 128mb. How can i do it?
I am new to this, so please try to help me.

Thanks in advance
sapir
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070530/78cbe575/attachment.htm 

[U-Boot-Users] how can i change the amount of flash memory?

[Stefan Roese]

On Wednesday 30 May 2007, sapirf fersht wrote:
> I need to program a new board for a customer which is based on ixdp-425. I
> need to change the flash memory from 256mb to 128mb. How can i do it?
> I am new to this, so please try to help me.

Since the ixdp425 U-Boot port already uses the common CFI flash driver, no 
changes should be needed. *If* the customer board really is identical to the 
Intel IXDP425 board except for the flash size.

Did you give the ixdp425 image a try on the other board?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================