public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Blocking network in ixp425
Date: Wed, 6 Jun 2007 09:36:17 +0200	[thread overview]
Message-ID: <200706060936.17357.sr@denx.de> (raw)
In-Reply-To: <330EC2471BF24E48B513AF1A6975EB690C8276@MAIL-UA.ccs.local>

On Wednesday 06 June 2007, Teemu Keskinarkaus wrote:
> > So *are* you using the official U-Boot version? Or is this some
> > development
> > from your company that's not available in the official repository?
>
> As a base there is U-boot version 1.1.2 and then there has been added
> support for some proprietary protocols. Plus the networking for ixp425
> is taken from Redboot(I don't know why, maybe back then it was easiest
> way?). And no, the version I'm using is not publicly available.

So you are asking for support here, for some code that we don't know and don't 
have access to?

> > > right driver would work little better with the timeouts. I tested
> > > yesterday and timeout didn't occur and I waited 15-20minutes.
> >
> > Timeouts didn't occur means "tftp" commands is hanging? Or what do you
> > mean?
>
> I have taken the original proprietary protocol handler code from another
> U-boot(that's version, not so surprisingly, is 1.1.2) that was working
> on different platform. It calls eth_rx - function and by design of the
> code I can see that the eth_rx does not block on that platform like it
> does on ixp425.
>
> So, eth_rx - call does not timeout on ixp425 platform. There is no log
> to send other than that I have prints before and after the eth_rx and
> the later print never shows if for example the network cable is not
> connected and nothing goes to ixp425. I also tested with tftp. During
> transfer I disconnected the network cable. Transfer stopped, but no 'T'
> (for timeout?) appeared or should they?

Yes, they should appear.

Again I ask you to give the official version a try.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

  reply	other threads:[~2007-06-06  7:36 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-06-05  8:49 [U-Boot-Users] Blocking network in ixp425 Teemu Keskinarkaus
2007-06-05  9:05 ` Stefan Roese
2007-06-05  9:21   ` Teemu Keskinarkaus
2007-06-05 10:01     ` Stefan Roese
2007-06-06  4:26       ` Teemu Keskinarkaus
2007-06-06  5:19         ` Stefan Roese
2007-06-06  6:07           ` Teemu Keskinarkaus
2007-06-06  7:36             ` Stefan Roese [this message]
2007-06-06  8:33               ` Teemu Keskinarkaus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200706060936.17357.sr@denx.de \
    --to=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox